ERJ-S06J112V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J112V is a 1.1 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently active in production with 826 units in stock. Equivalent and substitute parts are identified when design requirements allow for variations in power rating, manufacturer, or specific feature sets while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	1.1 kOhms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06J112V are grouped based on the following criteria:

Electrical Parameters (Must Match):

Resistance value: 1.1 kOhms
Tolerance: ±5%
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package / Case: 0805 (2012 Metric)
Number of Terminations: 2
Moisture Sensitivity Level: 1 (Unlimited)

Allowed Variations:

Power Rating: Substitutes may have equal or higher power ratings (0.125W, 0.4W, or 0.5W)
Manufacturer: Different manufacturers acceptable
Specific Features: Anti-sulfur, pulse withstanding, or moisture resistant features may vary
Height - Seated: Minor variations permitted within 0.020" to 0.028"
Compliance Ratings: AEC-Q200 automotive rating preferred but not mandatory for all substitutes

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Height Max (mm)	RoHS3
ERJ-S06J112V	Panasonic	1.1 kΩ	±5%	0.125	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.70	Yes
ERJ-6GEYJ112V	Panasonic	1.1 kΩ	±5%	0.125	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.70	Yes
ERJ-P06J112V	Panasonic	1.1 kΩ	±5%	0.5	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.70	Yes
CR0805-JW-112ELF	Bourns Inc.	1.1 kΩ	±5%	0.125	0805	±200ppm/°C	-55 ~ 155°C	No	0.60	Yes
CRCW08051K10JNEA	Vishay Dale	1.1 kΩ	±5%	0.125	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.50	Yes
ESR10EZPJ112	Rohm Semiconductor	1.1 kΩ	±5%	0.4	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.65	Yes
RMCF0805JT1K10	Stackpole Electronics Inc	1.1 kΩ	±5%	0.125	0805	±200ppm/°C	-55 ~ 155°C	Yes	0.65	Yes

Engineering Selection Recommendations

Direct Equivalents (Same Power Rating - 0.125W):

ERJ-6GEYJ112V: Panasonic equivalent with identical electrical and mechanical specifications. AEC-Q200 rated. Suitable for direct substitution in automotive applications.
CRCW08051K10JNEA: Vishay Dale equivalent with AEC-Q200 rating. Lowest seated height (0.50mm) may provide advantages in space-constrained layouts.
RMCF0805JT1K10: Stackpole Electronics equivalent with AEC-Q200 rating and highest inventory availability (1,077,687 units).

Higher Power Rating Substitutes:

ERJ-P06J112V: Panasonic 0.5W variant. Suitable when circuit design permits higher power dissipation capability. AEC-Q200 rated with pulse withstanding feature.
ESR10EZPJ112: Rohm Semiconductor 0.4W variant. AEC-Q200 rated with pulse withstanding capability. Intermediate power rating option.

Non-Automotive Rated Substitute:

CR0805-JW-112ELF: Bourns Inc. part without AEC-Q200 rating. Moisture resistant feature. Suitable only for non-automotive applications or where automotive qualification is not required.

All substitutes maintain ROHS3 compliance, MSL Level 1 rating, and identical electrical performance within specified tolerance and temperature coefficient parameters.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J112V (0.5W) be used as a direct replacement for ERJ-S06J112V (0.125W)?

A: Yes. The higher power rating (0.5W vs 0.125W) is a superset capability. All electrical parameters, package dimensions, and operating temperature ranges are identical. The ERJ-P06J112V will function correctly in any circuit designed for the ERJ-S06J112V. The higher power rating provides additional thermal margin.

Q: What is the difference between ERJ-S06J112V and ERJ-6GEYJ112V?

A: Both are Panasonic 1.1 kOhms ±5% 0.125W 0805 resistors with identical electrical specifications and AEC-Q200 rating. The primary difference is the series designation (ERJ-S06 vs ERJ-6G). The ERJ-6GEYJ112V lacks the anti-sulfur feature of the ERJ-S06J112V but is otherwise electrically and mechanically equivalent.

Q: Is CR0805-JW-112ELF suitable for automotive applications?

A: The CR0805-JW-112ELF is not AEC-Q200 rated and is therefore not qualified for automotive applications. It is suitable only for consumer or industrial applications where automotive qualification is not required.

Q: Do all substitute parts have the same physical height?

A: No. Seated heights vary: ERJ-S06J112V (0.70mm), CRCW08051K10JNEA (0.50mm), ESR10EZPJ112 (0.65mm), and RMCF0805JT1K10 (0.65mm). These variations are within acceptable tolerances for 0805 package specifications and do not affect electrical performance. Height differences may be relevant only in space-constrained PCB designs with minimal clearance.

Q: Which substitute has the best inventory availability?

A: RMCF0805JT1K10 from Stackpole Electronics has the highest inventory with 1,077,687 units in stock, compared to 826 units for the ERJ-S06J112V.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant with MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original ERJ-S06J112V specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message