ERJ-S06F9532V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F9532V is a 95.3 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part maintains active product status with 1002 units currently in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where alternative manufacturers or series variants meet identical electrical and mechanical specifications.

Substiute Parts

ERJ-S06F9532V

Panasonic Electronic ComponentsIn Stock: 1047ERJ-S06F9532V Datasheet

Current PartRFQ

ERJ-6ENF9532V

Panasonic Electronic ComponentsIn Stock: 92870ERJ-6ENF9532V Datasheet

SimilarRFQ

CRCW080595K3FKEA

Vishay DaleIn Stock: 26447CRCW080595K3FKEA Datasheet

SimilarRFQ

RC0805FR-0795K3L

YAGEOIn Stock: 43166RC0805FR-0795K3L Datasheet

SimilarRFQ

RMCF0805FT95K3

Stackpole Electronics IncIn Stock: 24713RMCF0805FT95K3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F9532V are qualified based on strict equivalence across the following parameters: resistance value (95.3 kOhms), tolerance (±1%), power rating (0.125W), package format (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), RoHS3 compliance, and MSL rating (1). All identified substitutes maintain identical electrical performance and mechanical compatibility. Variations in physical height and manufacturer-specific features (such as anti-sulfur coating or automotive certification) are noted but do not affect functional interchangeability within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the ERJ-S06F9532V. Selection among equivalents should be based on application-specific requirements and compliance mandates.

For automotive applications requiring AEC-Q200 certification, the ERJ-6ENF9532V (Panasonic), CRCW080595K3FKEA (Vishay Dale), and RMCF0805FT95K3 (Stackpole Electronics) are qualified options. The RC0805FR-0795K3L (YAGEO) does not carry AEC-Q200 rating and is suitable for non-automotive applications requiring moisture-resistant thick film construction.

Physical height variations across the substitute set range from 0.020" to 0.028", which may influence PCB layout density and assembly clearance considerations. All parts maintain ROHS3 compliance and MSL rating 1 (unlimited moisture sensitivity protection).

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF9532V be used as a direct replacement for ERJ-S06F9532V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (95.3 kOhms ±1%, 0.125W, ±100ppm/°C), operate across the same temperature range (-55°C ~ 155°C), and are packaged in 0805 format with AEC-Q200 certification. The primary difference is the series designation (ERJ-6EN versus ERJ-S06), which reflects manufacturing line variation without affecting functional performance.

Q: Is the YAGEO RC0805FR-0795K3L suitable for automotive applications?

A: The RC0805FR-0795K3L is not AEC-Q200 certified. For automotive applications requiring AEC-Q200 qualification, use ERJ-6ENF9532V, CRCW080595K3FKEA, or RMCF0805FT95K3 instead.

Q: Do physical height differences affect PCB assembly?

A: Physical height variations (0.020" to 0.028") are within standard 0805 package tolerances and do not affect reflow soldering or component placement. However, designs with tight vertical clearance constraints should verify specific height requirements against PCB layout specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, matching the ERJ-S06F9532V compliance status.

Q: What is the significance of MSL rating 1?

A: MSL (Moisture Sensitivity Level) rating 1 indicates unlimited shelf life without moisture protection requirements. All parts in this equivalency set carry MSL 1, eliminating moisture-related handling constraints during storage and assembly.