ERJ-S06F9530V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F9530V is a 953 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The component is active in production status. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

ERJ-S06F9530V

Panasonic Electronic ComponentsIn Stock: 807ERJ-S06F9530V Datasheet

Current PartRFQ

ERJ-6ENF9530V

Panasonic Electronic ComponentsIn Stock: 55358ERJ-6ENF9530V Datasheet

SimilarRFQ

CRCW0805953RFKEA

Vishay DaleIn Stock: 12908CRCW0805953RFKEA Datasheet

SimilarRFQ

RC0805FR-07953RL

YAGEOIn Stock: 20263RC0805FR-07953RL Datasheet

SimilarRFQ

RMCF0805FT953R

Stackpole Electronics IncIn Stock: 3203RMCF0805FT953R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F9530V are qualified based on the following criteria:

• Resistance value: 953 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitutes maintain these electrical and mechanical specifications. Variations in physical height and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability within the defined parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active production status and full ROHS3 compliance. Selection among these alternatives is determined by:

• PCB layout constraints: Height variations range from 0.50mm to 0.70mm maximum seated height. Verify clearance requirements for your specific application.
• Automotive qualification: ERJ-6ENF9530V, CRCW0805953RFKEA, and RMCF0805FT953R carry AEC-Q200 ratings. RC0805FR-07953RL does not specify AEC-Q200 but carries moisture resistant construction.
• Inventory availability: ERJ-6ENF9530V (55,306 pcs), CRCW0805953RFKEA (12,834 pcs), RC0805FR-07953RL (20,200 pcs), and RMCF0805FT953R (3,176 pcs) are in stock.
• Feature requirements: ERJ-S06F9530V and ERJ-6ENF9530V feature anti-sulfur construction; RC0805FR-07953RL features moisture resistant construction.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF9530V directly replace ERJ-S06F9530V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (953 Ω ±1%, 0.125W), operate across -55°C to 155°C, carry AEC-Q200 automotive qualification, and are packaged in 0805 (2012 Metric). The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and anti-sulfur feature in the original part.

Q: Are there height restrictions when substituting?

A: Yes. Maximum seated heights vary: ERJ-S06F9530V (0.70mm), ERJ-6ENF9530V (0.70mm), CRCW0805953RFKEA (0.50mm), RC0805FR-07953RL (0.60mm), and RMCF0805FT953R (0.65mm). Verify your PCB design clearance specifications before selection.

Q: Which substitute parts carry automotive AEC-Q200 qualification?

A: ERJ-6ENF9530V, CRCW0805953RFKEA, and RMCF0805FT953R are rated AEC-Q200. RC0805FR-07953RL does not carry this rating but is suitable for non-automotive or less stringent applications.

Q: Do all substitutes meet RoHS3 compliance?

A: Yes. All listed parts are ROHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level).

Q: What is the difference between anti-sulfur and moisture resistant construction?

A: Anti-sulfur construction protects against sulfur-containing atmospheric corrosion, typical in automotive environments. Moisture resistant construction protects against humidity ingress. Both are thick film compositions with identical electrical performance at the specified parameters.