Panasonic ERJ-S06F8663V 866kΩ 1% 1/8W 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The Panasonic ERJ-S06F8663V is an 866 kΩ ±1% thick film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently active in production with 726 units in stock. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across different manufacturers while preserving critical performance characteristics such as tolerance, power rating, temperature coefficient, and package dimensions.

Substiute Parts

ERJ-S06F8663V

Panasonic Electronic ComponentsIn Stock: 745ERJ-S06F8663V Datasheet

Current PartRFQ

ERJ-6ENF8663V

Panasonic Electronic ComponentsIn Stock: 7478ERJ-6ENF8663V Datasheet

SimilarRFQ

CRCW0805866KFKEA

Vishay DaleIn Stock: 17371CRCW0805866KFKEA Datasheet

SimilarRFQ

RC0805FR-07866KL

YAGEOIn Stock: 64816RC0805FR-07866KL Datasheet

SimilarRFQ

RMCF0805FT866K

Stackpole Electronics IncIn Stock: 792RMCF0805FT866K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F8663V is determined by strict equivalence across the following critical parameters:

• Resistance value: 866 kΩ (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Termination count: 2 (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All identified substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with the main part number in circuit applications requiring 866 kΩ ±1% 0805 thick film resistors.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production components with ROHS3 compliance and MSL 1 rating, indicating full environmental and regulatory compatibility with the main part number ERJ-S06F8663V.

The ERJ-6ENF8663V (Panasonic) maintains identical specifications and is from the same manufacturer, differing only in series designation (ERJ-6EN versus ERJ-S06). This part carries 7413 units in inventory.

The CRCW0805866KFKEA (Vishay Dale) is functionally equivalent with the lowest seated height specification at 0.020" (0.50mm), providing design flexibility for space-constrained applications. Inventory availability is 17299 units.

The RC0805FR-07866KL (YAGEO) offers the highest inventory availability at 64787 units and includes moisture-resistant features. Seated height is 0.024" (0.60mm).

The RMCF0805FT866K (Stackpole Electronics Inc) maintains AEC-Q200 automotive qualification with seated height of 0.026" (0.65mm). Inventory is limited to 723 units.

Selection among these substitutes depends on availability requirements, seated height constraints for PCB layout, and supply chain preferences. All parts are electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF8663V replace ERJ-S06F8663V in automotive applications?

A: Yes. Both parts are Panasonic 866 kΩ ±1% 0805 thick film resistors with identical electrical specifications, AEC-Q200 qualification, and operating temperature range (-55°C to 155°C). The series designation difference does not affect functional compatibility.

Q: Are there height differences between substitute parts that affect PCB design?

A: Yes. Seated height varies across substitutes: ERJ-S06F8663V and ERJ-6ENF8663V are 0.028" (0.70mm), CRCW0805866KFKEA is 0.020" (0.50mm), RC0805FR-07866KL is 0.024" (0.60mm), and RMCF0805FT866K is 0.026" (0.65mm). PCB layout clearance and component stacking requirements must account for these dimensional variations.

Q: Do all substitute parts meet automotive qualification requirements?

A: ERJ-S06F8663V, ERJ-6ENF8663V, CRCW0805866KFKEA, and RMCF0805FT866K carry AEC-Q200 ratings. RC0805FR-07866KL does not list AEC-Q200 qualification but includes moisture-resistant features. Selection depends on specific automotive qualification requirements for the application.

Q: What is the significance of MSL 1 rating across all parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All listed parts share this rating, ensuring consistent handling and storage procedures.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. All substitute parts maintain the same operating temperature range of -55°C to 155°C and identical temperature coefficient of ±100ppm/°C, ensuring consistent performance across thermal extremes.