ERJ-S06F82R5V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F82R5V is a 82.5 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The part is active and in production. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and compliance certifications to support component procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value
Resistance	82.5 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F82R5V are qualified based on the following criteria:

Electrical Parameters (Must Match):

Resistance value: 82.5 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package / Case: 0805 (2012 Metric)
Number of terminations: 2
Moisture Sensitivity Level: 1 (Unlimited)

Compliance Parameters (Must Match or Exceed):

RoHS Status: ROHS3 Compliant or equivalent
REACH Status: REACH Unaffected or REACH Compliant

Substitute parts are grouped by manufacturer and packaging type. All identified substitutes maintain identical electrical and mechanical specifications. Compliance status variations are noted where applicable.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	RoHS Status	AEC-Q200	Packaging Type
ERJ-S06F82R5V	Panasonic Electronic Components	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	ROHS3 Compliant	Yes	Tape & Reel (TR)
ERJ-6ENF82R5V	Panasonic Electronic Components	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	ROHS3 Compliant	Yes	Cut Tape (CT) & Digi-Reel®
CR0805-FX-82R5ELF	Bourns Inc.	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	ROHS3 Compliant	No	Tape & Reel (TR)
CRCW080582R5FKEA	Vishay Dale	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	ROHS3 Compliant	Yes	Tape & Reel (TR)
CRCW080582R5FKTA	Vishay Dale	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	RoHS non-compliant	Yes	Tape & Reel (TR)
RC0805FR-0782R5L	YAGEO	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	ROHS3 Compliant	No	Tape & Reel (TR)
RMCF0805FT82R5	Stackpole Electronics Inc	82.5 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	ROHS3 Compliant	Yes	Tape & Reel (TR)

Engineering Selection Recommendations

For Automotive Applications (AEC-Q200 Required): Select from ERJ-6ENF82R5V (Panasonic), CRCW080582R5FKEA (Vishay Dale), or RMCF0805FT82R5 (Stackpole Electronics Inc). All three parts carry active product status and AEC-Q200 qualification. CRCW080582R5FKEA offers the lowest seated height at 0.020" (0.50mm). RMCF0805FT82R5 provides an alternative from Stackpole with equivalent specifications.

For General Industrial Applications (AEC-Q200 Not Required): CR0805-FX-82R5ELF (Bourns Inc.) and RC0805FR-0782R5L (YAGEO) are suitable alternatives. Both are ROHS3 compliant and offer moisture-resistant thick film construction. RC0805FR-0782R5L has the highest inventory availability at 116,566 pieces.

Compliance Considerations: CRCW080582R5FKTA (Vishay Dale) is RoHS non-compliant and REACH Affected. This part is not recommended for new designs or applications with RoHS compliance requirements.

Packaging Considerations: ERJ-6ENF82R5V is supplied in Cut Tape (CT) & Digi-Reel® packaging, differing from the standard Tape & Reel (TR) format of the main part. All other substitutes use Tape & Reel (TR) packaging.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF82R5V replace ERJ-S06F82R5V directly? A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (82.5 Ω ±1%, 0.125W), operate across -55°C to 155°C, and carry AEC-Q200 qualification. The primary difference is packaging format: ERJ-6ENF82R5V uses Cut Tape & Digi-Reel® while ERJ-S06F82R5V uses Tape & Reel. Verify your assembly equipment compatibility with the packaging format.

Q: Are Bourns CR0805-FX-82R5ELF and YAGEO RC0805FR-0782R5L suitable for automotive applications? A: These parts do not carry AEC-Q200 qualification. They are suitable for general industrial applications but not recommended for automotive designs requiring AEC-Q200 compliance.

Q: What is the significance of the height differences among substitute parts? A: Seated height varies from 0.020" (0.50mm) to 0.028" (0.70mm) across substitutes. For PCB designs with tight vertical clearance constraints, CRCW080582R5FKEA and CRCW080582R5FKTA offer the lowest profile at 0.020" (0.50mm). Verify your design specifications before selecting based on height.

Q: Why is CRCW080582R5FKTA marked as RoHS non-compliant? A: CRCW080582R5FKTA is RoHS non-compliant and REACH Affected. This part should not be used in new designs or applications subject to RoHS or REACH regulations. Use CRCW080582R5FKEA instead, which is ROHS3 compliant.

Q: Which substitute has the highest inventory availability? A: RC0805FR-0782R5L (YAGEO) has 116,566 pieces in stock, the highest among all substitutes. ERJ-6ENF82R5V (Panasonic) has 107,497 pieces available.

Q: Can I mix different manufacturers' parts in the same assembly? A: Yes, provided all selected parts meet your electrical, mechanical, and compliance requirements. All listed substitutes share identical resistance, tolerance, power rating, package, and operating temperature specifications. Verify AEC-Q200 requirement for your application before selecting non-qualified alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message