ERJ-S06F80R6V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F80R6V is a 0805 (2012 Metric) thick film chip resistor manufactured by Panasonic Electronic Components. This 80.6 Ohm ±1% 1/8W (0.125W) component is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The part operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 (Unlimited). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

ERJ-S06F80R6V

Panasonic Electronic ComponentsIn Stock: 1058ERJ-S06F80R6V Datasheet

Current PartRFQ

ERJ-6ENF80R6V

Panasonic Electronic ComponentsIn Stock: 83873ERJ-6ENF80R6V Datasheet

SimilarRFQ

CRCW080580R6FKEA

Vishay DaleIn Stock: 28410CRCW080580R6FKEA Datasheet

SimilarRFQ

RC0805FR-0780R6L

YAGEOIn Stock: 2726RC0805FR-0780R6L Datasheet

SimilarRFQ

RMCF0805FT80R6

Stackpole Electronics IncIn Stock: 38015RMCF0805FT80R6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 80.6 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical specifications. Variations in physical height and specific feature sets (anti-sulfur vs. moisture-resistant) do not affect functional substitution within the defined parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the ERJ-S06F80R6V. Selection among alternatives is based on:

Compliance and Ratings: ERJ-S06F80R6V, ERJ-6ENF80R6V, CRCW080580R6FKEA, and RMCF0805FT80R6 carry AEC-Q200 automotive qualification. RC0805FR-0780R6L does not specify AEC-Q200 but meets all electrical and dimensional requirements.

Feature Differentiation: ERJ-S06F80R6V includes anti-sulfur construction. ERJ-6ENF80R6V, CRCW080580R6FKEA, and RMCF0805FT80R6 are specified for automotive use. RC0805FR-0780R6L is specified as moisture-resistant.

Physical Dimensions: All parts conform to 0805 package with maximum seated heights ranging from 0.50mm to 0.70mm. PCB layout and assembly clearance requirements determine acceptability within specific designs.

Availability: Inventory levels vary significantly, with ERJ-6ENF80R6V offering the highest stock position (83,857 pcs) and RC0805FR-0780R6L the lowest (2,652 pcs).

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF80R6V replace ERJ-S06F80R6V directly?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (80.6 Ω ±1%, 0.125W), operate across -55°C to 155°C, carry AEC-Q200 rating, and use 0805 packaging. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and feature set (automotive vs. anti-sulfur). Functional substitution is complete.

Q: What is the difference between anti-sulfur and moisture-resistant variants?

A: Anti-sulfur construction (ERJ-S06F80R6V) protects against sulfur-containing environmental contaminants. Moisture-resistant construction (RC0805FR-0780R6L) protects against moisture ingress. Both are valid for different environmental applications. Selection depends on end-use environment specifications.

Q: Are all substitute parts AEC-Q200 qualified?

A: ERJ-S06F80R6V, ERJ-6ENF80R6V, CRCW080580R6FKEA, and RMCF0805FT80R6 carry explicit AEC-Q200 automotive qualification. RC0805FR-0780R6L does not specify this rating but meets all electrical and dimensional parameters.

Q: Does physical height variation affect PCB assembly?

A: Physical heights range from 0.50mm (CRCW080580R6FKEA) to 0.70mm (ERJ-S06F80R6V and ERJ-6ENF80R6V). These variations are within standard 0805 package tolerance and do not affect standard PCB assembly processes. Verify clearance requirements for specific board designs with restricted vertical space.

Q: Can I mix substitute parts within a single assembly?

A: All listed parts meet identical electrical specifications and package dimensions. Mixed usage within a single assembly is permissible from an electrical and mechanical standpoint. Verify procurement and traceability requirements for your specific application.