ERJ-S06F7871V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F7871V is a 7.87 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 990 pieces in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit designs.

Substiute Parts

ERJ-S06F7871V

Panasonic Electronic ComponentsIn Stock: 1066ERJ-S06F7871V Datasheet

Current PartRFQ

ERJ-6ENF7871V

Panasonic Electronic ComponentsIn Stock: 34048ERJ-6ENF7871V Datasheet

SimilarRFQ

CRCW08057K87FKEA

Vishay DaleIn Stock: 19912CRCW08057K87FKEA Datasheet

SimilarRFQ

RC0805FR-077K87L

YAGEOIn Stock: 115283RC0805FR-077K87L Datasheet

SimilarRFQ

RMCF0805FT7K87

Stackpole Electronics IncIn Stock: 149989RMCF0805FT7K87 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F7871V are qualified based on the following criteria:

• Electrical Specifications: Resistance value of 7.87 kOhms with ±1% tolerance
• Power Rating: 0.125W (1/8W) minimum
• Package Compatibility: 0805 (2012 Metric) form factor with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm)
• Temperature Performance: Operating range of -55°C ~ 155°C with ±100ppm/°C temperature coefficient
• Compliance: ROHS3 compliance, MSL 1 rating, and AEC-Q200 automotive qualification where applicable
• Composition: Thick film construction

All listed substitutes meet these core parameters and are suitable for direct replacement in applications requiring the ERJ-S06F7871V.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, ensuring compatibility with modern manufacturing and environmental standards. The ERJ-6ENF7871V, CRCW08057K87FKEA, and RMCF0805FT7K87 carry AEC-Q200 automotive qualification, matching the primary application environment of the ERJ-S06F7871V. The RC0805FR-077K87L from YAGEO provides an alternative with moisture-resistant construction and equivalent electrical performance. Height variations among substitutes (0.020" to 0.028") remain within acceptable PCB assembly tolerances for 0805 packages. Selection should be based on availability, supply chain requirements, and specific application certifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF7871V replace ERJ-S06F7871V directly? A: Yes. Both parts share identical electrical specifications (7.87 kΩ ±1%, 0.125W), package dimensions (0805), temperature performance (±100ppm/°C, -55°C ~ 155°C), and AEC-Q200 qualification. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and the absence of anti-sulfur coating in the ERJ-6ENF variant.

Q: Are there height differences that affect PCB assembly? A: Yes. Seated heights vary: ERJ-S06F7871V (0.70mm), CRCW08057K87FKEA (0.50mm), RC0805FR-077K87L (0.60mm), and RMCF0805FT7K87 (0.65mm). These variations are within standard 0805 package tolerances and do not affect reflow soldering or component placement on standard PCB designs.

Q: Which substitute is best for automotive applications? A: ERJ-6ENF7871V, CRCW08057K87FKEA, and RMCF0805FT7K87 all carry AEC-Q200 automotive qualification. Selection depends on supply availability and specific design requirements. The ERJ-S06F7871V's anti-sulfur feature is not replicated in ERJ-6ENF7871V but is not required for standard automotive use.

Q: Do all substitutes meet RoHS and MSL requirements? A: Yes. All listed parts are ROHS3 compliant with MSL 1 (Unlimited) rating, suitable for lead-free assembly and unrestricted storage conditions.

Q: Can I use RC0805FR-077K87L if AEC-Q200 is not required? A: Yes. The RC0805FR-077K87L meets all core electrical and mechanical specifications with moisture-resistant construction. Use this part only in applications where automotive qualification is not mandated.