ERJ-S06F7870V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F7870V is a 787 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is active and widely available. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are met across alternative manufacturers.

Substiute Parts

ERJ-S06F7870V

Panasonic Electronic ComponentsIn Stock: 916ERJ-S06F7870V Datasheet

Current PartRFQ

ERJ-6ENF7870V

Panasonic Electronic ComponentsIn Stock: 54286ERJ-6ENF7870V Datasheet

SimilarRFQ

CRCW0805787RFKEA

Vishay DaleIn Stock: 17908CRCW0805787RFKEA Datasheet

SimilarRFQ

RC0805FR-07787RL

YAGEOIn Stock: 89291RC0805FR-07787RL Datasheet

SimilarRFQ

RMCF0805FT787R

Stackpole Electronics IncIn Stock: 16733RMCF0805FT787R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F7870V are qualified based on the following criteria:

• Resistance value: 787 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All substitute parts meet these electrical and mechanical specifications. Variations in physical height and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability within the defined parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and MSL rating 1. Selection among these equivalents depends on application-specific requirements:

ERJ-6ENF7870V (Panasonic) is a direct series alternative from the same manufacturer, maintaining identical electrical and dimensional specifications to the primary part.

CRCW0805787RFKEA (Vishay Dale) offers the lowest seated height at 0.020" (0.50mm), suitable for space-constrained PCB layouts.

RC0805FR-07787RL (YAGEO) provides moisture-resistant construction with intermediate height specifications.

RMCF0805FT787R (Stackpole Electronics Inc) maintains AEC-Q200 automotive rating with height at 0.026" (0.65mm).

All parts support the full operating temperature range of -55°C to 155°C and carry unlimited moisture sensitivity classification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F7870V be directly replaced with ERJ-6ENF7870V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (787 Ω ±1%, 0.125W), operate across -55°C to 155°C, and are packaged in 0805 (2012 Metric). The primary difference is the series designation (ERJ-S06 vs. ERJ-6EN).

Q: Are there height restrictions when substituting with CRCW0805787RFKEA?

A: CRCW0805787RFKEA has a maximum seated height of 0.020" (0.50mm), compared to 0.028" (0.70mm) for ERJ-S06F7870V. This lower profile is compatible with standard 0805 PCB footprints and does not create clearance issues in typical applications.

Q: Which substitute part is suitable for automotive applications?

A: ERJ-6ENF7870V, CRCW0805787RFKEA, and RMCF0805FT787R all carry AEC-Q200 automotive ratings. RC0805FR-07787RL does not list AEC-Q200 certification but meets all other electrical and mechanical requirements.

Q: Do all substitute parts meet RoHS compliance?

A: Yes. All listed parts are ROHS3 compliant with MSL rating 1 (Unlimited), matching the primary part's environmental and regulatory status.

Q: What is the significance of anti-sulfur vs. moisture-resistant features?

A: ERJ-S06F7870V includes anti-sulfur construction; RC0805FR-07787RL specifies moisture-resistant construction. Both are protective features for different environmental exposures. Selection depends on the specific application environment. All parts maintain identical electrical performance within the specified tolerance and temperature range.