ERJ-S06F76R8V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F76R8V is a 76.8 Ohm ±1% 1/8W (0.125W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is active and in production, with 802 units currently in stock.

Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and enable component sourcing from multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F76R8V

Panasonic Electronic ComponentsIn Stock: 892ERJ-S06F76R8V Datasheet

Current PartRFQ

ERJ-6ENF76R8V

Panasonic Electronic ComponentsIn Stock: 51411ERJ-6ENF76R8V Datasheet

SimilarRFQ

RC0805FR-0776R8L

YAGEOIn Stock: 7749RC0805FR-0776R8L Datasheet

SimilarRFQ

RMCF0805FT76R8

Stackpole Electronics IncIn Stock: 2006RMCF0805FT76R8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Resistance value: 76.8 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical specifications. Variations in features (such as anti-sulfur coating or automotive certification) do not disqualify substitution but are noted for application-specific requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for standard PCB assembly and storage conditions.

For automotive applications requiring AEC-Q200 qualification, ERJ-6ENF76R8V (Panasonic), and RMCF0805FT76R8 (Stackpole Electronics Inc) are qualified options. The ERJ-S06F76R8V includes additional anti-sulfur protection; this feature is not present in ERJ-6ENF76R8V but both maintain equivalent electrical performance.

RC0805FR-0776R8L (YAGEO) provides moisture-resistant construction without automotive certification, suitable for general industrial and consumer applications within the specified temperature and electrical parameters.

Selection should prioritize availability and supply chain requirements. ERJ-6ENF76R8V offers the highest inventory level (51,311 units), while RMCF0805FT76R8 and RC0805FR-0776R8L provide alternative sourcing with lower inventory positions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF76R8V replace ERJ-S06F76R8V in automotive applications?

A: ERJ-6ENF76R8V meets all electrical and mechanical specifications and carries AEC-Q200 qualification. The primary difference is the absence of anti-sulfur coating in the ERJ-6ENF variant. For applications where anti-sulfur protection is not a design requirement, ERJ-6ENF76R8V is a direct substitute.

Q: What is the difference between the 0805 package dimensions across manufacturers?

A: All parts conform to 0805 (2012 Metric) package standard: 0.079" L × 0.049" W (2.00mm × 1.25mm). Height variations (0.024" to 0.028") fall within acceptable PCB assembly tolerances and do not affect electrical performance or board layout compatibility.

Q: Is RC0805FR-0776R8L suitable for automotive use?

A: RC0805FR-0776R8L does not carry AEC-Q200 certification. It is suitable for general industrial and consumer applications. For automotive designs requiring AEC-Q200 compliance, use ERJ-6ENF76R8V or RMCF0805FT76R8.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, confirming compatibility with standard lead-free PCB assembly processes and storage conditions.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes. All substitute parts share identical electrical specifications (76.8 Ω ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and 0805 package footprint. PCB layout and schematic designs require no modification for substitution.