ERJ-S06F7681V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F7681V is a 7.68 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur properties and operates across -55°C to 155°C. The part is currently active in production with 1126 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

ERJ-S06F7681V

Panasonic Electronic ComponentsIn Stock: 1150ERJ-S06F7681V Datasheet

Current PartRFQ

ERJ-6ENF7681V

Panasonic Electronic ComponentsIn Stock: 71438ERJ-6ENF7681V Datasheet

SimilarRFQ

AC0805FR-077K68L

YAGEOIn Stock: 10741AC0805FR-077K68L Datasheet

SimilarRFQ

CRCW08057K68FKEA

Vishay DaleIn Stock: 10758CRCW08057K68FKEA Datasheet

SimilarRFQ

RC0805FR-077K68L

YAGEOIn Stock: 8199RC0805FR-077K68L Datasheet

SimilarRFQ

RMCF0805FT7K68

Stackpole Electronics IncIn Stock: 84120RMCF0805FT7K68 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F7681V are qualified based on strict equivalence of the following parameters:

• Resistance value: 7.68 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Compliance: ROHS3, AEC-Q200 (where applicable)
• Moisture sensitivity level: 1 (Unlimited)

All identified substitutes maintain these core electrical and mechanical parameters. Variations in physical height and packaging format (Tape & Reel vs. Cut Tape) do not affect functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the ERJ-S06F7681V. Selection among substitutes depends on application-specific requirements:

For automotive applications requiring AEC-Q200 certification, ERJ-6ENF7681V, AC0805FR-077K68L, CRCW08057K68FKEA, and RMCF0805FT7K68 are fully qualified. RC0805FR-077K68L lacks AEC-Q200 rating and is suitable only for non-automotive applications.

Panasonic ERJ-6ENF7681V offers the highest inventory availability (71367 units) and maintains identical physical dimensions to the primary part. Stackpole RMCF0805FT7K68 provides the second-highest inventory (84011 units) with minimal height variation (0.026" vs. 0.028").

All parts comply with ROHS3 and maintain MSL 1 (Unlimited) moisture sensitivity rating. Physical height differences (0.020" to 0.028") are within standard PCB assembly tolerances and do not affect circuit functionality.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF7681V directly replace ERJ-S06F7681V? A: Yes. Both parts are manufactured by Panasonic with identical electrical specifications (7.68 kΩ ±1%, 0.125W), package format (0805), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 certification. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and higher inventory availability of the ERJ-6ENF7681V.

Q: Are cross-manufacturer substitutes compatible with automotive designs? A: AC0805FR-077K68L, CRCW08057K68FKEA, and RMCF0805FT7K68 are all AEC-Q200 rated and suitable for automotive applications. RC0805FR-077K68L lacks AEC-Q200 certification and is restricted to non-automotive use.

Q: Does the difference in component height affect PCB assembly? A: No. Height variations range from 0.020" to 0.028" (0.50mm to 0.70mm), all within standard 0805 package tolerances and PCB assembly specifications. These differences do not impact reflow soldering, component placement, or circuit performance.

Q: What is the significance of packaging format differences? A: ERJ-S06F7681V, ERJ-6ENF7681V, AC0805FR-077K68L, CRCW08057K68FKEA, and RMCF0805FT7K68 are supplied in Tape & Reel format suitable for automated assembly. RC0805FR-077K68L is available in Cut Tape & Digi-Reel format, which may require different handling in high-volume production environments but maintains identical electrical performance.

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part specification.