ERJ-S06F66R5V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F66R5V is a 66.5 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is currently active with 1045 units in stock. Equivalent and substitute parts are identified when identical electrical specifications, mechanical dimensions, and compliance ratings are maintained across different manufacturers or product series.

Key Parameters

Parameter	Value
Resistance	66.5 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F66R5V are qualified based on the following criteria:

Resistance value: 66.5 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
RoHS3 compliance
Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts maintain these core electrical and mechanical specifications. Variations in height (seated maximum) and specific feature sets (anti-sulfur vs. moisture resistant vs. standard automotive) do not affect functional interchangeability within the defined parameter set.

Parameter Comparison

Parameter	ERJ-S06F66R5V	ERJ-6ENF66R5V	CRCW080566R5FKEA	RC0805FR-0766R5L	RMCF0805FT66R5
Manufacturer	Panasonic	Panasonic	Vishay Dale	YAGEO	Stackpole Electronics
Resistance	66.5 Ohms	66.5 Ohms	66.5 Ohms	66.5 Ohms	66.5 Ohms
Tolerance	±1%	±1%	±1%	±1%	±1%
Power Rating	0.125W	0.125W	0.125W	0.125W	0.125W
Package	0805	0805	0805	0805	0805
Composition	Thick Film	Thick Film	Thick Film	Thick Film	Thick Film
Temperature Coefficient	±100ppm/°C	±100ppm/°C	±100ppm/°C	±100ppm/°C	±100ppm/°C
Operating Temperature	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C
Height - Seated (Max)	0.028" (0.70mm)	0.028" (0.70mm)	0.020" (0.50mm)	0.024" (0.60mm)	0.026" (0.65mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL	1	1	1	1	1

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the ERJ-S06F66R5V. Selection among these alternatives is based on:

Automotive AEC-Q200 Rated Parts: ERJ-6ENF66R5V (Panasonic), CRCW080566R5FKEA (Vishay Dale), and RMCF0805FT66R5 (Stackpole Electronics) carry explicit AEC-Q200 automotive qualification ratings.

General Industrial Applications: RC0805FR-0766R5L (YAGEO) is qualified for moisture-resistant applications without specific automotive certification.

Panasonic Series Continuity: ERJ-6ENF66R5V represents the current Panasonic product line (ERJ-6EN series) and maintains the same electrical specifications as the ERJ-S06F66R5V legacy series.

All parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level) and are suitable for direct substitution in circuit designs where the specified parameters are required.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF66R5V replace ERJ-S06F66R5V in automotive applications? A: Yes. Both parts are Panasonic products with identical electrical specifications (66.5 Ohms ±1%, 0.125W), identical package (0805), identical temperature range (-55°C ~ 155°C), and both carry AEC-Q200 automotive qualification. ERJ-6ENF66R5V represents the current product series.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur construction (ERJ-S06F66R5V) protects against sulfur contamination in specific environments. Moisture-resistant construction (RC0805FR-0766R5L) protects against moisture ingress. Both are thick film resistors with identical electrical performance. Feature selection depends on environmental exposure requirements.

Q: Are all substitute parts suitable for AEC-Q200 automotive applications? A: ERJ-6ENF66R5V, CRCW080566R5FKEA, and RMCF0805FT66R5 carry explicit AEC-Q200 ratings. RC0805FR-0766R5L does not list AEC-Q200 certification. For automotive applications requiring AEC-Q200 compliance, use only the three explicitly rated parts.

Q: Does the height difference between substitute parts affect PCB assembly? A: Height variations (0.020" to 0.028" seated maximum) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are suitable for standard 0805 reflow soldering processes.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), meeting current environmental and regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message