ERJ-S06F63R4V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F63R4V is a 63.4 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently active in production with 1019 units in stock. Equivalent and substitute parts are identified when identical electrical specifications, mechanical dimensions, and compliance ratings can be maintained across alternative manufacturers while preserving circuit performance and reliability requirements.

Substiute Parts

ERJ-S06F63R4V

Panasonic Electronic ComponentsIn Stock: 1075ERJ-S06F63R4V Datasheet

Current PartRFQ

ERJ-6ENF63R4V

Panasonic Electronic ComponentsIn Stock: 77468ERJ-6ENF63R4V Datasheet

SimilarRFQ

CRCW080563R4FKEA

Vishay DaleIn Stock: 14536CRCW080563R4FKEA Datasheet

SimilarRFQ

RC0805FR-0763R4L

YAGEOIn Stock: 30336RC0805FR-0763R4L Datasheet

SimilarRFQ

RMCF0805FT63R4

Stackpole Electronics IncIn Stock: 1077RMCF0805FT63R4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F63R4V is determined by strict equivalence across the following parameters: resistance value (63.4 Ohms), tolerance (±1%), power rating (0.125W), package format (0805 / 2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, AEC-Q200 where applicable). All identified substitute parts maintain these core electrical and mechanical specifications. Variations in physical height, packaging format (tape & reel versus cut tape), and specific feature sets (anti-sulfur versus moisture resistant) do not affect functional substitutability when the primary parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical equivalence to the ERJ-S06F63R4V across resistance, tolerance, power rating, and temperature specifications. Selection among these alternatives depends on application-specific requirements:

For automotive applications requiring AEC-Q200 certification, the ERJ-6ENF63R4V (Panasonic), CRCW080563R4FKEA (Vishay Dale), and RMCF0805FT63R4 (Stackpole Electronics) are qualified options. The ERJ-6ENF63R4V offers the highest inventory availability at 77,369 units. The CRCW080563R4FKEA provides the lowest maximum seated height at 0.50mm, which may be advantageous for space-constrained PCB layouts.

The RC0805FR-0763R4L (YAGEO) does not carry AEC-Q200 automotive qualification but maintains ROHS3 compliance and moisture-resistant thick film construction. This part is suitable for non-automotive applications and offers substantial inventory depth at 30,302 units.

All parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level) and share identical dimensional footprints for direct PCB substitution.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF63R4V replace ERJ-S06F63R4V in automotive circuits? A: Yes. Both parts are Panasonic thick film 0805 resistors with identical 63.4 Ohm ±1% specifications, 0.125W power rating, ±100ppm/°C temperature coefficient, and AEC-Q200 automotive qualification. The primary difference is the series designation (ERJ-6EN versus ERJ-S06), which reflects manufacturing line evolution. Electrical and mechanical performance are equivalent.

Q: What is the significance of the height differences among substitute parts? A: Physical height variations (0.50mm to 0.70mm maximum seated height) reflect different manufacturing processes but do not affect electrical performance. Height differences are relevant only for PCB assembly clearance verification. Confirm available vertical space in your specific PCB layout before selection.

Q: Is the YAGEO RC0805FR-0763R4L suitable for automotive applications? A: The RC0805FR-0763R4L is not AEC-Q200 qualified and therefore is not recommended for automotive applications requiring this certification. It is suitable for industrial and consumer electronics applications where automotive qualification is not mandated.

Q: Are all substitute parts available in tape & reel packaging? A: The CRCW080563R4FKEA is available in both Cut Tape (CT) and Digi-Reel® formats. All other parts are supplied in standard Tape & Reel (TR) packaging. Confirm packaging requirements with your procurement specification before ordering.

Q: Can these parts be used interchangeably on the same PCB assembly? A: Yes, all listed parts share the 0805 (2012 Metric) package footprint and are mechanically and electrically interchangeable. No PCB redesign is required for substitution. Verify component height clearance and confirm that your assembly process accommodates the specific packaging format of your selected alternative.