ERJ-S06F6342V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F6342V is a 63.4 kOhms ±1% thick film chip resistor rated at 0.125W (1/8W) in 0805 (2012 Metric) package format, manufactured by Panasonic Electronic Components. This part is classified as Active status and features anti-sulfur properties with automotive AEC-Q200 qualification. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct circuit board replacement capability.

Substiute Parts

ERJ-S06F6342V

Panasonic Electronic ComponentsIn Stock: 1024ERJ-S06F6342V Datasheet

Current PartRFQ

ERJ-6ENF6342V

Panasonic Electronic ComponentsIn Stock: 57409ERJ-6ENF6342V Datasheet

SimilarRFQ

CRG0805F63K4

TE Connectivity Passive ProductIn Stock: 778CRG0805F63K4 Datasheet

DirectRFQ

CRCW080563K4FKEA

Vishay DaleIn Stock: 29594CRCW080563K4FKEA Datasheet

SimilarRFQ

RC0805FR-0763K4L

YAGEOIn Stock: 34271RC0805FR-0763K4L Datasheet

SimilarRFQ

RC2012F6342CS

Samsung Electro-MechanicsIn Stock: 843RC2012F6342CS Datasheet

SimilarRFQ

RMCF0805FT63K4

Stackpole Electronics IncIn Stock: 20543RMCF0805FT63K4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F6342V are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 63.4 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these core requirements. Variations in seated height, packaging format (Tape & Reel vs. Cut Tape), and optional features (automotive AEC-Q200, anti-sulfur, moisture resistant) do not affect electrical or mechanical substitutability.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are Active status components with ROHS3 compliance and MSL Level 1 rating, meeting the core substitution criteria for the ERJ-S06F6342V.

Panasonic ERJ-6ENF6342V: Direct Panasonic alternative within the same manufacturer ecosystem. Maintains identical electrical and mechanical specifications with automotive AEC-Q200 qualification. Highest inventory availability (57,352 pcs) supports supply chain continuity.

Vishay Dale CRCW080563K4FKEA: Automotive AEC-Q200 qualified substitute with lowest seated height (0.020"). Suitable for applications requiring compact vertical clearance. High inventory (29,544 pcs) ensures availability.

TE Connectivity CRG0805F63K4: Non-automotive rated alternative with standard thick film composition. Appropriate for non-automotive applications where AEC-Q200 qualification is not required. Moderate inventory (756 pcs).

YAGEO RC0805FR-0763K4L: Moisture-resistant thick film composition without automotive qualification. Suitable for general industrial applications. High inventory (34,230 pcs) supports volume requirements.

Samsung Electro-Mechanics RC2012F6342CS: Moisture-resistant thick film composition supplied in Cut Tape format. Appropriate for applications where individual component handling is preferred over reel format. Limited inventory (811 pcs).

Stackpole Electronics RMCF0805FT63K4: Automotive AEC-Q200 qualified substitute with standard seated height. Suitable for automotive applications requiring qualified components. Moderate inventory (20,505 pcs).

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F6342V be replaced with any of these substitute parts without circuit modification?

A: Yes. All listed substitute parts match the core electrical parameters (63.4 kOhms ±1%, 0.125W), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and mechanical package (0805 / 2012 Metric). Direct board-level substitution is supported without circuit redesign.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape packaging provides individual components pre-cut from the carrier tape, suitable for manual assembly or small-volume applications. Electrical and mechanical specifications remain identical; packaging format affects handling and assembly methodology only.

Q: Does seated height variation affect substitutability?

A: Seated height variations (ranging from 0.020" to 0.028" across substitute parts) do not affect electrical substitutability. Height differences may impact PCB layout clearance in space-constrained designs. Verify clearance requirements for your specific application if vertical space is limited.

Q: Are automotive AEC-Q200 qualified parts required for this application?

A: AEC-Q200 qualification is required only for automotive applications. For non-automotive industrial or consumer applications, non-qualified alternatives (such as CRG0805F63K4) provide equivalent electrical and mechanical performance at potentially lower cost. Verify application requirements before selecting a substitute.

Q: What does RoHS3 compliance mean?

A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All listed parts are ROHS3 compliant, ensuring regulatory compliance for EU and equivalent markets.

Q: Can I mix substitute parts from different manufacturers in the same assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers in the same assembly does not affect circuit performance. However, for supply chain consistency and traceability, single-manufacturer sourcing is often preferred in production environments.