ERJ-S06F5762V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F5762V is a 57.6 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with anti-sulfur properties and automotive AEC-Q200 qualification. The part maintains active product status with 633 units currently in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where alternative manufacturers or feature sets may be preferred.

Substiute Parts

ERJ-S06F5762V

Panasonic Electronic ComponentsIn Stock: 721ERJ-S06F5762V Datasheet

Current PartRFQ

ERJ-6ENF5762V

Panasonic Electronic ComponentsIn Stock: 128810ERJ-6ENF5762V Datasheet

SimilarRFQ

CRCW080557K6FKEA

Vishay DaleIn Stock: 21790CRCW080557K6FKEA Datasheet

SimilarRFQ

RC0805FR-0757K6L

YAGEOIn Stock: 28234RC0805FR-0757K6L Datasheet

SimilarRFQ

RMCF0805FT57K6

Stackpole Electronics IncIn Stock: 17548RMCF0805FT57K6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F5762V are qualified based on strict electrical and mechanical parameter matching:

Electrical Parameters (Must Match):

• Resistance value: 57.6 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Number of terminations: 2
• Supplier device package: 0805

Compliance Parameters (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

All identified substitutes meet these core requirements. Variations in height (seated maximum) and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and full ROHS3 compliance with unlimited moisture sensitivity rating. Selection among these equivalents should be based on:

Panasonic ERJ-6ENF5762V: Panasonic manufacturer continuity with automotive AEC-Q200 rating. Highest inventory availability (128,760 units). Identical electrical and mechanical specifications to the primary part, with removal of anti-sulfur feature designation.

Vishay Dale CRCW080557K6FKEA: Automotive AEC-Q200 rated alternative from established manufacturer. Lowest seated height (0.020" / 0.50mm) suitable for space-constrained PCB layouts. Inventory: 21,699 units.

YAGEO RC0805FR-0757K6L: Moisture-resistant thick film composition without automotive AEC-Q200 designation. Suitable for non-automotive applications requiring moisture resistance. Inventory: 28,127 units.

Stackpole Electronics RMCF0805FT57K6: Automotive AEC-Q200 rated option with intermediate seated height (0.026" / 0.65mm). Inventory: 17,457 units.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F5762V be directly replaced with ERJ-6ENF5762V? A: Yes. Both parts share identical electrical specifications (57.6 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), mechanical package (0805), and compliance ratings (ROHS3, MSL 1). The primary difference is the removal of anti-sulfur feature designation in the ERJ-6ENF variant.

Q: Are all substitute parts suitable for automotive applications? A: ERJ-6ENF5762V, CRCW080557K6FKEA, and RMCF0805FT57K6 carry automotive AEC-Q200 qualification. RC0805FR-0757K6L does not include AEC-Q200 rating and is suitable for non-automotive applications.

Q: What is the significance of seated height differences? A: Seated height variations (0.020" to 0.028") reflect manufacturing tolerances and design differences between manufacturers. All values remain within acceptable limits for standard 0805 package PCB assembly. CRCW080557K6FKEA offers the lowest profile at 0.020" for space-constrained designs.

Q: Do all substitutes maintain the same temperature coefficient? A: Yes. All listed parts maintain ±100ppm/°C temperature coefficient and -55°C ~ 155°C operating range, ensuring consistent thermal performance across the substitution group.

Q: Is packaging format identical across all parts? A: Yes. All parts are supplied in 0805 (2012 Metric) package in Tape & Reel (TR) format with 2 terminations, ensuring compatibility with standard SMD assembly processes.