ERJ-S06F56R2V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F56R2V is a 56.2 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production with 923 units currently in stock. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and component availability options for applications requiring identical electrical and mechanical specifications.

Substiute Parts

ERJ-S06F56R2V

Panasonic Electronic ComponentsIn Stock: 948ERJ-S06F56R2V Datasheet

Current PartRFQ

ERJ-6ENF56R2V

Panasonic Electronic ComponentsIn Stock: 79731ERJ-6ENF56R2V Datasheet

SimilarRFQ

CR0805-FX-56R2ELF

Bourns Inc.In Stock: 25982CR0805-FX-56R2ELF Datasheet

SimilarRFQ

CRCW080556R2FKEA

Vishay DaleIn Stock: 18708CRCW080556R2FKEA Datasheet

SimilarRFQ

RC0805FR-0756R2L

YAGEOIn Stock: 954618RC0805FR-0756R2L Datasheet

SimilarRFQ

RMCF0805FT56R2

Stackpole Electronics IncIn Stock: 15354RMCF0805FT56R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F56R2V are qualified based on the following criteria:

• Identical resistance value: 56.2 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.125W (1/8W)
• Identical package: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: MSL 1 (Unlimited)

All substitute parts meet these core electrical and mechanical parameters. Variations in physical dimensions (height) and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability within the specified parameter constraints.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for direct replacement in applications currently using the ERJ-S06F56R2V.

For automotive applications requiring AEC-Q200 qualification, the following parts maintain this certification: ERJ-6ENF56R2V (Panasonic), CRCW080556R2FKEA (Vishay Dale), and RMCF0805FT56R2 (Stackpole Electronics Inc).

For applications where moisture resistance is the primary design consideration, CR0805-FX-56R2ELF (Bourns Inc.) and RC0805FR-0756R2L (YAGEO) provide moisture-resistant thick film construction.

Physical height variations range from 0.020" to 0.028" maximum seated height. PCB layout and assembly process constraints should be evaluated when selecting among substitute parts with different height specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF56R2V replace ERJ-S06F56R2V directly?

A: Yes. Both parts share identical electrical specifications (56.2 Ω, ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), package format (0805), composition (thick film), and compliance ratings (ROHS3, MSL 1). The primary difference is the series designation and feature set. ERJ-6ENF56R2V is available in significantly higher inventory (79680 units).

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating protects against sulfur contamination in industrial environments. Moisture-resistant construction provides enhanced protection against humidity exposure. Both are thick film resistor enhancements. The choice depends on the specific environmental conditions of the application.

Q: Are all substitute parts suitable for automotive applications?

A: Not all. Only ERJ-6ENF56R2V, CRCW080556R2FKEA, and RMCF0805FT56R2 carry AEC-Q200 automotive qualification. CR0805-FX-56R2ELF and RC0805FR-0756R2L are qualified for general industrial and commercial use with moisture resistance features.

Q: Does the height difference between substitute parts affect PCB assembly?

A: Height variations (0.020" to 0.028" maximum) are within standard 0805 package tolerances. Assembly compatibility depends on specific PCB design, solder reflow profile, and component placement constraints. Verify with your manufacturing partner if height-sensitive applications are involved.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), matching the compliance profile of the ERJ-S06F56R2V.