ERJ-S06F5602V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F5602V is a 56 kOhms ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The part is currently active with 1041 units in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific performance requirements.

Substiute Parts

ERJ-S06F5602V
Panasonic Electronic ComponentsIn Stock: 1099ERJ-S06F5602V Datasheet
ERJ-S06F5602V
Current Part
ERJ-UP6F5602V
Panasonic Electronic ComponentsIn Stock: 5469ERJ-UP6F5602V Datasheet
ERJ-UP6F5602V
Upgrade
ERJ-6ENF5602V
Panasonic Electronic ComponentsIn Stock: 68694ERJ-6ENF5602V Datasheet
ERJ-6ENF5602V
Similar
CRG0805F56K
TE Connectivity Passive ProductIn Stock: 21439CRG0805F56K Datasheet
CRG0805F56K
Direct
AC0805FR-0756KL
YAGEOIn Stock: 5057AC0805FR-0756KL Datasheet
AC0805FR-0756KL
Similar
CR0805-FX-5602ELF
Bourns Inc.In Stock: 33098CR0805-FX-5602ELF Datasheet
CR0805-FX-5602ELF
Similar
CRCW080556K0FKEA
Vishay DaleIn Stock: 44683CRCW080556K0FKEA Datasheet
CRCW080556K0FKEA
Similar
CRCW080556K0FKEAHP
Vishay DaleIn Stock: 6052CRCW080556K0FKEAHP Datasheet
CRCW080556K0FKEAHP
Similar
RC0805FR-0756KL
YAGEOIn Stock: 5489RC0805FR-0756KL Datasheet
RC0805FR-0756KL
Similar
RCS080556K0FKEA
Vishay DaleIn Stock: 11104RCS080556K0FKEA Datasheet
RCS080556K0FKEA
Similar
RMCF0805FT56K0
Stackpole Electronics IncIn Stock: 52181RMCF0805FT56K0 Datasheet
RMCF0805FT56K0
Similar

Key Parameters

Parameter Value
Resistance 56 kOhms
Tolerance ±1%
Power Rating 0.125W (1/8W)
Package / Case 0805 (2012 Metric)
Composition Thick Film
Temperature Coefficient ±100ppm/°C
Operating Temperature Range -55°C ~ 155°C
Automotive Rating AEC-Q200
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalents (Same Electrical Specifications): Parts with identical resistance (56 kOhms), tolerance (±1%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). These parts are interchangeable without circuit redesign.

Upgrade Substitutes (Higher Power Rating): Parts with identical resistance, tolerance, package, and temperature specifications but with increased power rating (0.5W / 1/2W). These provide enhanced pulse withstanding capability and thermal performance while maintaining mechanical and electrical compatibility.

Key Parameters Determining Substitution:

  • Resistance value and tolerance
  • Power rating (0.125W or 0.5W)
  • Package type (0805)
  • Temperature coefficient
  • Operating temperature range
  • Composition (Thick Film)

Parameter Comparison

Part Number Manufacturer Resistance Tolerance Power (W) Package Temp Coeff Op Temp Range AEC-Q200 Height Max (mm)
ERJ-S06F5602V Panasonic 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C Yes 0.70
ERJ-UP6F5602V Panasonic 56 kΩ ±1% 0.5 0805 ±100ppm/°C -55 ~ 155°C Yes 0.70
ERJ-6ENF5602V Panasonic 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C Yes 0.70
CRG0805F56K TE Connectivity 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C No 0.65
AC0805FR-0756KL YAGEO 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C Yes 0.60
CR0805-FX-5602ELF Bourns Inc. 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C No 0.60
CRCW080556K0FKEA Vishay Dale 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C Yes 0.50
CRCW080556K0FKEAHP Vishay Dale 56 kΩ ±1% 0.5 0805 ±100ppm/°C -55 ~ 155°C Yes 0.50
RC0805FR-0756KL YAGEO 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C No 0.60
RCS080556K0FKEA Vishay Dale 56 kΩ ±1% 0.5 0805 ±100ppm/°C -55 ~ 155°C Yes 0.50
RMCF0805FT56K0 Stackpole Electronics 56 kΩ ±1% 0.125 0805 ±100ppm/°C -55 ~ 155°C Yes 0.65

Engineering Selection Recommendations

For Direct Replacement (0.125W, 1/8W): Select from ERJ-6ENF5602V, AC0805FR-0756KL, CRCW080556K0FKEA, or RMCF0805FT56K0. All maintain identical electrical specifications and 0805 package compatibility. Parts with AEC-Q200 certification (ERJ-6ENF5602V, AC0805FR-0756KL, CRCW080556K0FKEA, RMCF0805FT56K0) are preferred for automotive applications requiring qualification compliance.

For Upgraded Performance (0.5W, 1/2W): Select ERJ-UP6F5602V, CRCW080556K0FKEAHP, or RCS080556K0FKEA for applications requiring enhanced pulse withstanding and thermal margin. All three maintain AEC-Q200 certification and 0805 package compatibility while providing increased power dissipation capability.

For Non-Automotive Applications: CRG0805F56K and CR0805-FX-5602ELF are suitable alternatives where AEC-Q200 certification is not required. Both maintain electrical specifications and 0805 package compatibility.

Packaging Consideration: RC0805FR-0756KL is supplied in Cut Tape (CT) & Digi-Reel® format rather than standard Tape & Reel (TR), suitable for applications with lower volume requirements or manual assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-UP6F5602V replace ERJ-S06F5602V directly? A: Yes. ERJ-UP6F5602V is a direct mechanical and electrical substitute with identical resistance, tolerance, package, and temperature specifications. The increased power rating (0.5W vs 0.125W) provides additional thermal margin and pulse withstanding capability without affecting circuit operation.

Q: Are all substitute parts AEC-Q200 qualified? A: No. AEC-Q200 certification is specified for ERJ-6ENF5602V, AC0805FR-0756KL, CRCW080556K0FKEA, CRCW080556K0FKEAHP, RCS080556K0FKEA, and RMCF0805FT56K0. CRG0805F56K, CR0805-FX-5602ELF, and RC0805FR-0756KL do not carry AEC-Q200 certification. Selection depends on application requirements.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur coating (ERJ-S06F5602V) protects against sulfur contamination in automotive environments. Moisture-resistant features (AC0805FR-0756KL, CR0805-FX-5602ELF, RC0805FR-0756KL) provide protection against humidity and moisture ingress. Both are compatible substitutes; selection depends on environmental exposure conditions.

Q: Does package height variation affect PCB assembly? A: Package heights range from 0.50mm to 0.70mm maximum seated height. All parts are 0805 (2012 Metric) and compatible with standard PCB assembly equipment. Height variation is within typical manufacturing tolerance and does not affect reflow soldering or component placement.

Q: Can I use RC0805FR-0756KL if my design specifies Tape & Reel packaging? A: RC0805FR-0756KL is supplied in Cut Tape (CT) & Digi-Reel® format. If your procurement or assembly process requires standard Tape & Reel (TR) packaging, select alternative parts with TR packaging specification. Electrical and mechanical specifications remain identical.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for automotive and industrial applications.

Request Quote (Ships tomorrow)