ERJ-S06F5363V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F5363V is a 536 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is actively produced and features anti-sulfur coating with automotive AEC-Q200 qualification. Substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct functional equivalence in circuit applications.

Substiute Parts

ERJ-S06F5363V

Panasonic Electronic ComponentsIn Stock: 838ERJ-S06F5363V Datasheet

Current PartRFQ

ERJ-6ENF5363V

Panasonic Electronic ComponentsIn Stock: 48217ERJ-6ENF5363V Datasheet

SimilarRFQ

CRCW0805536KFKEA

Vishay DaleIn Stock: 18932CRCW0805536KFKEA Datasheet

SimilarRFQ

KTR10EZPF5363

Rohm SemiconductorIn Stock: 1659KTR10EZPF5363 Datasheet

SimilarRFQ

RC0805FR-07536KL

YAGEOIn Stock: 42537RC0805FR-07536KL Datasheet

SimilarRFQ

RMCF0805FT536K

Stackpole Electronics IncIn Stock: 10353RMCF0805FT536K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F5363V are qualified based on the following criteria:

• Resistance value: 536 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Compliance: ROHS3 Compliant, MSL 1

All identified substitutes match these core electrical and mechanical parameters, enabling direct replacement in circuit designs without modification to PCB layout or assembly processes.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed above are ROHS3 compliant with MSL 1 rating and match the core electrical specifications of the ERJ-S06F5363V. Selection among substitutes should be based on the following factors:

Automotive Applications: For designs requiring AEC-Q200 qualification, select from ERJ-6ENF5363V, CRCW0805536KFKEA, KTR10EZPF5363, or RMCF0805FT536K. The RC0805FR-07536KL does not carry AEC-Q200 rating and is suitable only for non-automotive applications.

Height Constraints: The CRCW0805536KFKEA offers the lowest seated height at 0.50mm, beneficial for space-constrained PCB designs. The ERJ-S06F5363V and ERJ-6ENF5363V both reach 0.70mm maximum height.

Availability: ERJ-6ENF5363V and RC0805FR-07536KL offer the highest inventory levels at 48196 and 42505 units respectively.

Feature Differentiation: The KTR10EZPF5363 includes high voltage capability in addition to standard automotive qualification. The RC0805FR-07536KL features moisture-resistant composition without automotive certification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF5363V directly replace ERJ-S06F5363V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (536 kOhms ±1%, 0.125W), operate across -55°C to 155°C, carry AEC-Q200 qualification, and use the same 0805 package. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06), with ERJ-6ENF5363V offering significantly higher inventory availability.

Q: Are all substitute parts suitable for automotive applications?

A: No. Only ERJ-6ENF5363V, CRCW0805536KFKEA, KTR10EZPF5363, and RMCF0805FT536K carry AEC-Q200 automotive qualification. The RC0805FR-07536KL is qualified for general industrial and consumer applications only.

Q: What is the significance of the 0805 package designation?

A: The 0805 (2012 Metric) package specifies physical dimensions of 0.079" L × 0.049" W (2.00mm × 1.25mm). All listed substitutes use this identical package, ensuring compatibility with existing PCB footprints and assembly equipment without design modification.

Q: How do height differences affect PCB assembly?

A: Seated height variations (0.50mm to 0.70mm) are within standard PCB assembly tolerances and do not affect electrical performance. Height selection depends on available clearance above the component. The CRCW0805536KFKEA at 0.50mm is optimal for low-profile designs.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component requires no special moisture control during storage, handling, or assembly. All listed parts carry this rating, eliminating the need for dry-pack storage or baking procedures prior to reflow soldering.

Q: Can I substitute based on tolerance alone?

A: No. While all parts share ±1% tolerance, substitution requires matching all core parameters: resistance value (536 kOhms), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), and operating range (-55°C to 155°C). Partial matches do not ensure functional equivalence.