ERJ-S06F5112V Equivalent & Substitute Parts Reference

Part Overview

The ERJ-S06F5112V is a 51.1 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is active and widely available with 917 units in current stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct circuit board compatibility.

Key Parameters

Parameter	Value
Resistance	51.1 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F5112V are qualified based on the following criteria:

Primary Matching Parameters:

Resistance value: 51.1 kOhms
Tolerance: ±1%
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Considerations:

Power rating: 0.125W (1/8W) for direct equivalents; higher power ratings (0.5W) are upgrades
Compliance certifications: AEC-Q200 automotive qualification, RoHS3 compliance, REACH status
Special features: Anti-sulfur, moisture resistant, or pulse withstanding capabilities

All listed substitutes maintain identical electrical performance within the specified tolerance and operate across the full temperature range. Physical dimensions remain consistent within the 0805 package specification.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	AEC-Q200	RoHS Status	Inventory
ERJ-S06F5112V	Panasonic	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Anti-Sulfur	Yes	ROHS3	917
ERJ-6ENF5112V	Panasonic	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	Yes	ROHS3	85577
RMCS0805FT51K1	Stackpole	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Anti-Sulfur	No	ROHS3	1052
CR0805-FX-5112ELF	Bourns	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	No	ROHS3	28691
CRCW080551K1FKEA	Vishay Dale	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	Yes	ROHS3	20963
CRCW080551K1FKEAHP	Vishay Dale	51.1 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	AEC-Q200, Pulse Withstanding	Yes	ROHS3	5695
CRCW080551K1FKTA	Vishay Dale	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	Yes	Non-compliant	3791
RC0805FR-0751K1L	YAGEO	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	No	ROHS3	43499
RCS080551K1FKEA	Vishay Dale	51.1 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	AEC-Q200, Pulse Withstanding	Yes	ROHS3	5961
RMCF0805FT51K1	Stackpole	51.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	Yes	ROHS3	110293

Engineering Selection Recommendations

Direct Equivalents (0.125W, ±1%, 51.1 kΩ, 0805):

ERJ-6ENF5112V (Panasonic) is the closest equivalent with highest inventory availability (85,577 units). Both the main part and this substitute carry AEC-Q200 automotive qualification and ROHS3 compliance. The primary difference is the absence of anti-sulfur coating in the ERJ-6ENF5112V, though both maintain identical electrical performance.

RMCF0805FT51K1 (Stackpole) offers the highest inventory level (110,293 units) among all substitutes and maintains AEC-Q200 qualification with ROHS3 compliance. This part is suitable for automotive applications requiring equivalent reliability.

RC0805FR-0751K1L (YAGEO) provides strong inventory availability (43,499 units) with moisture-resistant construction and ROHS3 compliance, though it lacks AEC-Q200 automotive certification.

Upgraded Alternatives (0.5W Power Rating):

CRCW080551K1FKEAHP and RCS080551K1FKEA (both Vishay Dale) offer higher power dissipation (0.5W vs. 0.125W) with pulse withstanding capability and AEC-Q200 qualification. These are suitable for applications requiring enhanced thermal performance while maintaining the same resistance value and tolerance.

Compliance Considerations:

CRCW080551K1FKTA (Vishay Dale) is not RoHS3 compliant and is REACH affected. This part should be avoided for new designs requiring current environmental compliance standards.

All ROHS3-compliant substitutes are suitable for direct replacement in applications where the original part is specified, provided the power rating and feature set align with circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF5112V directly replace ERJ-S06F5112V?

A: Yes. Both parts share identical electrical specifications (51.1 kΩ ±1%, 0.125W, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range) and carry AEC-Q200 automotive qualification with ROHS3 compliance. The main difference is the anti-sulfur coating present in the ERJ-S06F5112V but absent in the ERJ-6ENF5112V. For applications not specifically requiring anti-sulfur protection, this substitute is fully compatible.

Q: What is the difference between 0.125W and 0.5W rated parts?

A: Power rating indicates the maximum continuous power dissipation the resistor can handle. A 0.5W part (such as CRCW080551K1FKEAHP) can dissipate four times more power than a 0.125W part while maintaining the same physical package size. Use 0.5W rated parts only when circuit analysis confirms higher power dissipation requirements. Oversizing power rating does not improve performance in lower-power applications.

Q: Are all listed substitutes in the same 0805 package?

A: Yes. All substitute parts listed are manufactured in the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L × 0.049" W / 2.00mm × 1.25mm). Physical board layout compatibility is maintained across all substitutes. Height variations (0.020" to 0.028" seated height) are within standard 0805 package tolerances and do not affect PCB assembly.

Q: Which substitute has the highest inventory availability?

A: RMCF0805FT51K1 (Stackpole Electronics) has the highest inventory with 110,293 units in stock. This part maintains AEC-Q200 automotive qualification and ROHS3 compliance, making it suitable for high-volume production requirements.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive electronics council qualification standard for passive components. It certifies that the part meets stringent reliability, temperature cycling, and performance requirements for automotive applications. Parts carrying this certification are suitable for use in automotive and other high-reliability environments.

Q: Can I use CRCW080551K1FKTA as a substitute?

A: CRCW080551K1FKTA is not recommended for new designs. While it matches the electrical specifications and power rating, it is not RoHS3 compliant and is REACH affected. Current environmental regulations and industry standards favor ROHS3-compliant alternatives. Use this part only in legacy applications where RoHS3 compliance is not required.

Q: What is the difference between moisture-resistant and anti-sulfur coatings?

A: Anti-sulfur coating protects against sulfur-containing atmospheric contaminants that can degrade resistor performance. Moisture-resistant coating protects against humidity and moisture ingress. Both are protective features; the choice depends on the specific environmental conditions of the application. The ERJ-S06F5112V features anti-sulfur protection, while alternatives like RC0805FR-0751K1L and CR0805-FX-5112ELF feature moisture-resistant construction.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message