ERJ-S06F5101V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F5101V is a 5.1 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliability in harsh environments. The part is active and in production. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where alternative manufacturers or feature sets may be preferred.

Substiute Parts

ERJ-S06F5101V

Panasonic Electronic ComponentsIn Stock: 950ERJ-S06F5101V Datasheet

Current PartRFQ

ERJ-6ENF5101V

Panasonic Electronic ComponentsIn Stock: 41457ERJ-6ENF5101V Datasheet

SimilarRFQ

CRG0805F5K1

TE Connectivity Passive ProductIn Stock: 29209CRG0805F5K1 Datasheet

DirectRFQ

AC0805FR-075K1L

YAGEOIn Stock: 22793AC0805FR-075K1L Datasheet

SimilarRFQ

CR0805-FX-5101ELF

Bourns Inc.In Stock: 77002CR0805-FX-5101ELF Datasheet

SimilarRFQ

CRCW08055K10FKEA

Vishay DaleIn Stock: 37840CRCW08055K10FKEA Datasheet

SimilarRFQ

CRCW08055K10FKEAHP

Vishay DaleIn Stock: 6612CRCW08055K10FKEAHP Datasheet

SimilarRFQ

ESR10EZPF5101

Rohm SemiconductorIn Stock: 28215ESR10EZPF5101 Datasheet

SimilarRFQ

RC0805FR-075K1L

YAGEOIn Stock: 57789RC0805FR-075K1L Datasheet

SimilarRFQ

RCS08055K10FKEA

Vishay DaleIn Stock: 22488RCS08055K10FKEA Datasheet

SimilarRFQ

RMCF0805FT5K10

Stackpole Electronics IncIn Stock: 131865RMCF0805FT5K10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped based on strict electrical and mechanical parameter alignment with the ERJ-S06F5101V. The primary substitution criteria are:

• Resistance value: 5.1 kOhms
• Tolerance: ±1%
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)

Substitute parts are further categorized by power rating and feature set. Parts with identical 0.125W power rating are direct functional equivalents. Parts with higher power ratings (0.4W, 0.5W) are suitable for applications where additional power dissipation capability is beneficial or required. Feature variations such as automotive AEC-Q200 qualification, anti-sulfur coating, moisture resistance, and pulse withstanding capability are noted but do not prevent substitution when electrical and mechanical parameters match.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain compliance with ROHS3 and MSL 1 (Unlimited) ratings, ensuring compatibility with standard manufacturing and storage processes.

For applications requiring automotive qualification, select from parts with AEC-Q200 certification: ERJ-6ENF5101V, AC0805FR-075K1L, CRCW08055K10FKEA, CRCW08055K10FKEAHP, ESR10EZPF5101, RCS08055K10FKEA, and RMCF0805FT5K10.

For applications where power dissipation is not a limiting factor, parts with 0.125W rating (ERJ-6ENF5101V, CRG0805F5K1, AC0805FR-075K1L, CR0805-FX-5101ELF, CRCW08055K10FKEA, RC0805FR-075K1L, RMCF0805FT5K10) provide direct electrical equivalence to the ERJ-S06F5101V.

For applications requiring enhanced power handling or pulse withstanding capability, parts with 0.4W or 0.5W ratings (CRCW08055K10FKEAHP, ESR10EZPF5101, RCS08055K10FKEA) are suitable alternatives.

Packaging format selection depends on assembly requirements: Tape & Reel packaging is standard for high-volume automated assembly; Cut Tape & Digi-Reel packaging supports lower-volume or mixed-component orders.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S06F5101V with a part having a different power rating?

A: Yes. Parts with higher power ratings (0.4W or 0.5W) are electrically compatible and can be substituted in applications where the original 0.125W rating is sufficient. The higher power rating provides additional thermal margin but does not affect circuit operation at the specified resistance and tolerance values.

Q: What is the significance of AEC-Q200 certification?

A: AEC-Q200 certification indicates the part meets automotive industry reliability standards for passive components. If your application requires automotive qualification, select only from parts with AEC-Q200 rating. Non-AEC-Q200 parts (CRG0805F5K1, CR0805-FX-5101ELF, RC0805FR-075K1L) are not suitable for automotive applications requiring this certification.

Q: Are there differences between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both packaging formats contain identical components. Tape & Reel packaging is optimized for continuous automated assembly lines. Cut Tape & Digi-Reel packaging supports flexible order quantities and mixed-component assembly. Selection depends on your manufacturing process and order volume requirements.

Q: Does the anti-sulfur feature of ERJ-S06F5101V affect substitution?

A: The anti-sulfur feature is a material enhancement specific to the ERJ-S06F5101V. Substitute parts without this feature are electrically equivalent and suitable for most applications. If your application specifically requires anti-sulfur protection, only the ERJ-S06F5101V provides this feature among the listed parts.

Q: Can I use RC0805FR-075K1L or AC0805FR-075K1L as direct replacements?

A: Yes. Both parts match the electrical specifications (5.1 kOhms, ±1%, 0.125W, 0805 package) and operating temperature range. AC0805FR-075K1L includes AEC-Q200 certification; RC0805FR-075K1L does not. Selection depends on whether automotive qualification is required for your application.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed parts share this rating, ensuring compatibility with standard component storage and assembly practices.