ERJ-S06F4R70V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F4R70V is a 4.7 Ohm ±1% 1/8W chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring high reliability. The part is currently in active production status with 988 pieces available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, supply chain continuity, or inventory optimization.

Substiute Parts

ERJ-S06F4R70V

Panasonic Electronic ComponentsIn Stock: 1012ERJ-S06F4R70V Datasheet

Current PartRFQ

ERJ-U06F4R70V

Panasonic Electronic ComponentsIn Stock: 5669ERJ-U06F4R70V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F4R70V are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters:

Electrical Parameters:

• Resistance value: 4.7 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Maximum seated height: 0.028" (0.70mm)
• Number of terminations: 2

Compliance & Features:

• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these criteria are classified as direct substitutes and are electrically and mechanically interchangeable in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-U06F4R70V is a direct substitute for the ERJ-S06F4R70V. Both parts are manufactured by Panasonic Electronic Components and share identical electrical specifications, mechanical dimensions, and compliance certifications. Both parts maintain active production status and are ROHS3 compliant with REACH unaffected designation.

The primary difference between these parts is the series designation (ERJ-S06 versus ERJ-U06), which reflects internal Panasonic product line categorization. This distinction does not affect electrical performance, mechanical compatibility, or functional application in circuit designs.

Selection between ERJ-S06F4R70V and ERJ-U06F4R70V should be based on availability and supply chain requirements. The ERJ-U06F4R70V currently has higher inventory availability (5630 pieces) compared to the ERJ-S06F4R70V (988 pieces), making it suitable for applications requiring larger quantities or extended supply assurance.

Frequently Asked Questions (FAQ)

Q: Are ERJ-S06F4R70V and ERJ-U06F4R70V electrically identical?

A: Yes. Both parts have identical resistance values (4.7 Ohms), tolerance (±1%), power rating (0.125W), temperature coefficient (-100 / +600 ppm/°C), and operating temperature range (-55°C ~ 155°C).

Q: Can ERJ-U06F4R70V be used as a direct replacement for ERJ-S06F4R70V in existing designs?

A: Yes. The parts are mechanically and electrically interchangeable. Both use the 0805 (2012 Metric) package with identical physical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.028" / 0.70mm).

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both ERJ-S06F4R70V and ERJ-U06F4R70V carry AEC-Q200 automotive qualification and feature anti-sulfur coating, making them suitable for automotive and industrial applications.

Q: What is the difference between the ERJ-S06 and ERJ-U06 series designations?

A: The series designation reflects Panasonic's internal product line categorization. From an engineering perspective, this designation does not affect electrical performance, mechanical compatibility, or functional characteristics in circuit applications.

Q: Are there any moisture sensitivity or handling differences between these parts?

A: No. Both parts have identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no special moisture handling or storage requirements.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on availability, supply chain continuity, and inventory requirements. Both parts are in active production status with full compliance certifications.