ERJ-S06F4701V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F4701V is a 4.7 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The product is active with 5807 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and compliance ratings to support design flexibility and supply chain continuity.

Key Parameters

Parameter	Value
Resistance	4.7 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Ratings	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts are classified into three categories based on electrical and mechanical compatibility with the ERJ-S06F4701V:

Direct Substitutes maintain identical electrical specifications (4.7 kOhms, ±1% tolerance, 0.125W power rating) and package format (0805), differing only in series designation or packaging method. These parts are interchangeable without circuit redesign.

Upgrade Substitutes increase the power rating to 0.5W (1/2W) while maintaining resistance value, tolerance, and package dimensions. These parts provide enhanced thermal performance and pulse withstanding capability, suitable for applications requiring higher power dissipation margins.

Similar Substitutes may vary in tolerance (±0.5% vs ±1%), power rating (0.5W vs 0.125W), or specific feature sets (anti-sulfur, pulse withstanding, moisture resistant) while maintaining the core 4.7 kOhms resistance and 0805 package. Selection depends on application-specific requirements for precision, thermal performance, and environmental protection.

Substitution eligibility is determined by:

Resistance value: 4.7 kOhms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Operating temperature range: -55°C ~ 155°C (minimum requirement)
Composition: Thick Film (preferred for consistency)
Compliance: AEC-Q200 or equivalent automotive qualification (for automotive applications)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Features	Temp Coeff	Op. Temp Range	AEC-Q200	Packaging Type	Inventory
ERJ-S06F4701V	Panasonic	4.7 kΩ	±1%	0.125	0805	Anti-Sulfur, AEC-Q200	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	5807
ERJ-U06F4701V	Panasonic	4.7 kΩ	±1%	0.125	0805	Anti-Sulfur, AEC-Q200	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	3489
ERJ-UP6F4701V	Panasonic	4.7 kΩ	±1%	0.5	0805	Anti-Sulfur, AEC-Q200, Pulse Withstanding	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	5997
ERJ-6ENF4701V	Panasonic	4.7 kΩ	±1%	0.125	0805	AEC-Q200	±100ppm/°C	-55 ~ 155°C	Yes	Cut Tape & Digi-Reel	43104
ERJ-P06D4701V	Panasonic	4.7 kΩ	±0.5%	0.5	0805	AEC-Q200, Pulse Withstanding	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	6027
ERJ-P06F4701V	Panasonic	4.7 kΩ	±1%	0.5	0805	AEC-Q200, Pulse Withstanding	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	15159
CRG0805F4K7	TE Connectivity	4.7 kΩ	±1%	0.125	0805	None specified	±100ppm/°C	-55 ~ 155°C	No	Tape & Reel	1492
AC0805FR-074K7L	YAGEO	4.7 kΩ	±1%	0.125	0805	AEC-Q200, Moisture Resistant	±100ppm/°C	-55 ~ 155°C	Yes	Cut Tape & Digi-Reel	266766
AF0805FR-074K7L	YAGEO	4.7 kΩ	±1%	0.125	0805	Anti-Sulfur, AEC-Q200	±100ppm/°C	-55 ~ 155°C	Yes	Tape & Reel	15709
CR0805-FX-4701ELF	Bourns Inc.	4.7 kΩ	±1%	0.125	0805	Moisture Resistant	±100ppm/°C	-55 ~ 155°C	No	Cut Tape & Digi-Reel	619307
CRCW08054K70FKEA	Vishay Dale	4.7 kΩ	±1%	0.125	0805	AEC-Q200	±100ppm/°C	-55 ~ 155°C	Yes	Cut Tape & Digi-Reel	10300

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): ERJ-U06F4701V (Panasonic) is the primary direct substitute, maintaining all electrical and mechanical parameters of the ERJ-S06F4701V. Both parts carry AEC-Q200 automotive qualification and anti-sulfur coating. ERJ-6ENF4701V (Panasonic) provides equivalent electrical performance with higher inventory availability (43104 units) but differs in packaging format (Cut Tape & Digi-Reel vs. Tape & Reel).

For Automotive Applications Requiring AEC-Q200: AF0805FR-074K7L (YAGEO) and CRCW08054K70FKEA (Vishay Dale) are qualified alternatives with AEC-Q200 certification. AC0805FR-074K7L (YAGEO) provides AEC-Q200 qualification with moisture-resistant features and exceptional inventory depth (266766 units).

For Enhanced Thermal Performance: ERJ-UP6F4701V, ERJ-P06F4701V, and ERJ-P06D4701V increase power rating to 0.5W with pulse withstanding capability. ERJ-P06D4701V offers tighter tolerance (±0.5%) for precision-critical applications. These upgrades maintain 0805 package compatibility and AEC-Q200 qualification.

For Non-Automotive Applications: CRG0805F4K7 (TE Connectivity) and CR0805-FX-4701ELF (Bourns) provide cost-effective alternatives without automotive qualification requirements. CR0805-FX-4701ELF offers superior inventory availability (619307 units) with moisture-resistant construction.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U06F4701V replace ERJ-S06F4701V directly? A: Yes. Both parts share identical electrical specifications (4.7 kΩ ±1%, 0.125W), 0805 package dimensions, AEC-Q200 qualification, and anti-sulfur coating. The difference is series designation only.

Q: What is the difference between ERJ-S06F4701V and ERJ-UP6F4701V? A: ERJ-UP6F4701V increases power rating from 0.125W to 0.5W and adds pulse withstanding capability. All other parameters remain identical. Use ERJ-UP6F4701V when circuit design requires higher power dissipation margin or pulse immunity.

Q: Are YAGEO and Bourns parts compatible with Panasonic ERJ-S06F4701V? A: Yes, for applications where AEC-Q200 qualification is required. AF0805FR-074K7L (YAGEO) and CRCW08054K70FKEA (Vishay Dale) maintain identical electrical specifications and 0805 package. AC0805FR-074K7L (YAGEO) and CR0805-FX-4701ELF (Bourns) are compatible but lack automotive qualification.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance? A: No. Packaging format affects only handling, storage, and assembly processes. Electrical and mechanical specifications remain identical. Select based on manufacturing equipment compatibility and inventory requirements.

Q: Can I use ERJ-P06D4701V (±0.5% tolerance) in place of ERJ-S06F4701V (±1% tolerance)? A: Yes. ERJ-P06D4701V provides tighter tolerance and higher power rating, making it suitable for any application designed for ERJ-S06F4701V. The upgrade improves performance without compromising compatibility.

Q: What does AEC-Q200 certification mean? A: AEC-Q200 is an automotive qualification standard ensuring the component meets reliability and performance requirements for automotive applications. Parts with this rating are suitable for automotive and industrial environments with stringent reliability demands.

Q: Is anti-sulfur coating necessary for all applications? A: Anti-sulfur coating protects against sulfur-induced corrosion in high-sulfur environments. For standard industrial and automotive applications, parts with or without anti-sulfur coating are functionally equivalent. Specify anti-sulfur coating only if environmental exposure to sulfur compounds is confirmed.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message