ERJ-S06F4700V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F4700V is a 470 Ohm ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The part is currently active in production with 1088 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings, improved tolerance specifications, or when alternative manufacturers' components meet the same electrical and mechanical parameters for cost optimization or supply chain flexibility.

Key Parameters

Parameter	Value
Resistance	470 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F4700V is determined by the following criteria:

Direct Equivalents maintain all critical parameters: 470 Ohm resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and ROHS3 compliance. These parts are interchangeable without circuit redesign.

Upgraded Substitutes increase the power rating to 0.5W (1/2W) while maintaining 470 Ohm resistance, ±1% tolerance, 0805 package, and all thermal specifications. These provide enhanced power dissipation capability and are backward compatible in applications where the original 0.125W rating was not a limiting constraint.

Higher Tolerance Substitutes improve tolerance to ±0.5% while maintaining 470 Ohm resistance, 0.5W power rating, 0805 package, and thermal specifications. These are suitable for precision applications requiring tighter tolerance control.

Cross-Manufacturer Equivalents from TE Connectivity, YAGEO, Bourns, and Vishay Dale provide identical or equivalent electrical and mechanical specifications, enabling supply chain alternatives while maintaining design compatibility.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Product Status
ERJ-S06F4700V	Panasonic	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	Active
ERJ-UP6F4700V	Panasonic	470Ω	±1%	0.5	0805	±100ppm/°C	-55~155°C	Yes	Active
ERJ-6ENF4700V	Panasonic	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	Active
ERJ-P06D4700V	Panasonic	470Ω	±0.5%	0.5	0805	±100ppm/°C	-55~155°C	Yes	Active
CRG0805F470R	TE Connectivity	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	No	Active
AC0805FR-07470RL	YAGEO	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	Active
CR0805-FX-4700ELF	Bourns	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	No	Active
CRCW0805470RFKEA	Vishay Dale	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	Active
CRCW0805470RFKEAHP	Vishay Dale	470Ω	±1%	0.5	0805	±100ppm/°C	-55~155°C	Yes	Active
CRCW0805470RFKEB	Vishay Dale	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	Discontinued
RC0805FR-07470RL	YAGEO	470Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	No	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): Select ERJ-6ENF4700V (Panasonic, same series family, different packaging), AC0805FR-07470RL (YAGEO, AEC-Q200 qualified), or CRCW0805470RFKEA (Vishay Dale, AEC-Q200 qualified). All maintain 470Ω ±1%, 0.125W, 0805 package, and automotive qualification.

For Automotive Applications Requiring AEC-Q200: Prioritize ERJ-6ENF4700V, AC0805FR-07470RL, CRCW0805470RFKEA, or CRCW0805470RFKEAHP. These parts carry explicit AEC-Q200 certification suitable for automotive and high-reliability industrial environments.

For Enhanced Power Dissipation: Select ERJ-UP6F4700V (Panasonic, 0.5W, AEC-Q200) or CRCW0805470RFKEAHP (Vishay Dale, 0.5W, AEC-Q200). These provide 4× power rating increase while maintaining all other specifications and automotive qualification.

For Precision Applications: Select ERJ-P06D4700V (Panasonic, ±0.5% tolerance, 0.5W, AEC-Q200) when tighter tolerance control is required.

For Non-Automotive Applications: CRG0805F470R (TE Connectivity) and CR0805-FX-4700ELF (Bourns) provide equivalent electrical performance without automotive certification, suitable for general industrial and consumer applications.

Avoid: CRCW0805470RFKEB (Vishay Dale) is discontinued at DiGi Electronics and should not be selected for new designs.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF4700V replace ERJ-S06F4700V directly? A: Yes. Both are Panasonic 470Ω ±1% 0.125W 0805 resistors with AEC-Q200 qualification and identical electrical specifications. The difference is packaging format (ERJ-6ENF uses Cut Tape & Digi-Reel versus ERJ-S06F uses Tape & Reel), which does not affect component performance.

Q: Is ERJ-UP6F4700V compatible with circuits designed for ERJ-S06F4700V? A: Yes, with design consideration. ERJ-UP6F4700V provides 0.5W power rating versus 0.125W in the original. This is a backward-compatible upgrade that increases power dissipation capability. No circuit modification is required; the higher power rating simply provides additional thermal margin.

Q: What is the difference between AC0805FR-07470RL and RC0805FR-07470RL? A: AC0805FR-07470RL carries AEC-Q200 automotive qualification; RC0805FR-07470RL does not. Both are YAGEO 470Ω ±1% 0.125W 0805 resistors with identical electrical performance. Select AC0805FR-07470RL for automotive applications.

Q: Can I use ERJ-P06D4700V as a substitute for ERJ-S06F4700V? A: Yes. ERJ-P06D4700V provides improved ±0.5% tolerance and higher 0.5W power rating while maintaining 470Ω resistance, 0805 package, and AEC-Q200 qualification. This is an upgraded substitute suitable for precision and high-power applications.

Q: Are cross-manufacturer parts (YAGEO, Bourns, Vishay, TE Connectivity) fully interchangeable? A: Parts with identical electrical specifications (470Ω ±1%, 0.125W, 0805, ±100ppm/°C, -55~155°C) are electrically interchangeable. For automotive applications, verify AEC-Q200 certification on the selected part. Physical dimensions may vary slightly (height range 0.020" to 0.028"), which is acceptable for standard PCB assembly.

Q: Why would I choose a higher power rating substitute? A: Higher power rating substitutes (0.5W versions) provide increased thermal margin and improved reliability in applications with marginal power dissipation. They are backward compatible and do not require circuit redesign.

Q: Is ROHS3 compliance maintained across all substitutes? A: Yes. All listed substitute parts maintain ROHS3 compliance, ensuring environmental and regulatory compatibility with the original ERJ-S06F4700V.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message