ERJ-S06F4530V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F4530V is a 453 Ohm ±1% 1/8W (0.125W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is active and in production with 1178 units currently in stock.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package size, termination count), and environmental ratings (temperature range, compliance certifications). These alternatives enable design flexibility, supply chain optimization, and continuity of production when the primary part becomes unavailable.

Substiute Parts

ERJ-S06F4530V

Panasonic Electronic ComponentsIn Stock: 1254ERJ-S06F4530V Datasheet

Current PartRFQ

ERJ-6ENF4530V

Panasonic Electronic ComponentsIn Stock: 72921ERJ-6ENF4530V Datasheet

SimilarRFQ

CRCW0805453RFKEA

Vishay DaleIn Stock: 19701CRCW0805453RFKEA Datasheet

SimilarRFQ

RC0805FR-07453RL

YAGEOIn Stock: 104171RC0805FR-07453RL Datasheet

SimilarRFQ

RMCF0805FT453R

Stackpole Electronics IncIn Stock: 16602RMCF0805FT453R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F4530V is determined by the following critical parameters:

Electrical Equivalence: Resistance value of 453 Ohms, tolerance of ±1%, and power rating of 0.125W (1/8W) must be identical across all substitute parts.

Mechanical Compatibility: Package designation of 0805 (2012 Metric), two terminations, and physical dimensions within the specified range (0.079" L × 0.049" W, height ≤ 0.028") ensure PCB footprint and assembly compatibility.

Environmental & Compliance Requirements: Operating temperature range of -55°C ~ 155°C, temperature coefficient of ±100ppm/°C, ROHS3 compliance, MSL rating of 1, and REACH unaffected status must be maintained.

Automotive Qualification: AEC-Q200 rating is specified for the main part and preferred in substitute selection where available, though not mandatory for functional equivalence.

All four substitute parts listed meet these core substitution criteria and are functionally equivalent to the ERJ-S06F4530V.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are electrically and mechanically equivalent to the ERJ-S06F4530V and maintain full compliance with ROHS3, REACH, and MSL requirements.

ERJ-6ENF4530V (Panasonic): Direct Panasonic alternative within the same manufacturer family. Maintains AEC-Q200 automotive qualification and identical electrical specifications. Highest inventory availability (72,852 units) among substitutes. Recommended for applications requiring automotive-grade reliability with maximum supply assurance.

CRCW0805453RFKEA (Vishay Dale): Vishay Dale equivalent with AEC-Q200 qualification. Seated height of 0.020" (0.50mm) is lower than the main part, providing potential PCB space optimization. Suitable for automotive and industrial applications with standard inventory levels (19,656 units).

RC0805FR-07453RL (YAGEO): YAGEO thick film resistor with moisture-resistant feature. Does not carry AEC-Q200 rating but meets all core electrical and environmental specifications. Largest inventory availability (104,115 units) among all options. Appropriate for non-automotive applications or where AEC-Q200 is not a design requirement.

RMCF0805FT453R (Stackpole Electronics): Stackpole thick film resistor with AEC-Q200 qualification. Seated height of 0.026" (0.65mm) remains within acceptable tolerance. Suitable for automotive applications with moderate inventory levels (16,582 units).

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF4530V be used as a direct replacement for ERJ-S06F4530V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (453 Ohms ±1%, 0.125W), operate across the same temperature range (-55°C ~ 155°C), and carry AEC-Q200 automotive qualification. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and the absence of anti-sulfur coating in the ERJ-6ENF4530V. For applications where anti-sulfur protection is not critical, this part provides full functional equivalence with superior inventory availability.

Q: Are there any height differences that affect PCB assembly?

A: Yes. The CRCW0805453RFKEA has a maximum seated height of 0.020" (0.50mm), compared to 0.028" (0.70mm) for the ERJ-S06F4530V. The RC0805FR-07453RL measures 0.024" (0.60mm), and the RMCF0805FT453R measures 0.026" (0.65mm). All heights remain within the 0805 package specification and are compatible with standard PCB assembly processes. Height differences are negligible for most applications but should be verified if clearance constraints exist.

Q: Which substitute is recommended for automotive applications?

A: ERJ-6ENF4530V, CRCW0805453RFKEA, and RMCF0805FT453R all carry AEC-Q200 automotive qualification and are suitable for automotive applications. The RC0805FR-07453RL lacks AEC-Q200 rating and should not be used in automotive designs unless the application does not require this certification.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating (ERJ-S06F4530V) protects against sulfur contamination in harsh industrial environments. Moisture-resistant coating (RC0805FR-07453RL) provides protection against humidity and moisture ingress. These are distinct protective mechanisms. Selection depends on the specific environmental exposure of the application.

Q: Are all substitutes ROHS3 and REACH compliant?

A: Yes. All five parts listed (main part and four substitutes) are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-07453RL has the highest inventory level at 104,115 units, followed by ERJ-6ENF4530V at 72,852 units. For supply chain continuity, these two options provide the strongest availability position.