ERJ-S06F40R2V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F40R2V is a 40.2 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently active in production with 1106 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across qualified manufacturers is needed while maintaining identical electrical and mechanical performance.

Substiute Parts

ERJ-S06F40R2V

Panasonic Electronic ComponentsIn Stock: 1192ERJ-S06F40R2V Datasheet

Current PartRFQ

ERJ-6ENF40R2V

Panasonic Electronic ComponentsIn Stock: 126030ERJ-6ENF40R2V Datasheet

SimilarRFQ

ERJ-P06F40R2V

Panasonic Electronic ComponentsIn Stock: 24774ERJ-P06F40R2V Datasheet

SimilarRFQ

CR0805-FX-40R2ELF

Bourns Inc.In Stock: 25984CR0805-FX-40R2ELF Datasheet

SimilarRFQ

CRCW080540R2FKEA

Vishay DaleIn Stock: 124357CRCW080540R2FKEA Datasheet

SimilarRFQ

RC0805FR-0740R2L

YAGEOIn Stock: 63444RC0805FR-0740R2L Datasheet

SimilarRFQ

RMCF0805FT40R2

Stackpole Electronics IncIn Stock: 69609RMCF0805FT40R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F40R2V are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 40.2 Ohms
• Tolerance: ±1%
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Environmental (Must Match or Exceed):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Power Rating Consideration: The ERJ-S06F40R2V operates at 0.125W (1/8W). Substitute parts with equal or higher power ratings are functionally equivalent. The ERJ-P06F40R2V (0.5W rating) is included as a direct substitute with enhanced power handling capability.

Automotive Qualification: The main part carries AEC-Q200 automotive qualification. Substitute parts either maintain this qualification or provide equivalent reliability through alternative certifications or moisture-resistant features.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts meet the core electrical and mechanical requirements for direct replacement of the ERJ-S06F40R2V. Selection among these alternatives should be based on the following factors:

For Automotive Applications with AEC-Q200 Requirement: ERJ-6ENF40R2V, ERJ-P06F40R2V, CRCW080540R2FKEA, and RMCF0805FT40R2 all carry AEC-Q200 qualification. These parts are suitable for automotive and mission-critical applications where this certification is mandatory.

For Enhanced Power Handling: ERJ-P06F40R2V provides 0.5W rating compared to the standard 0.125W, offering additional thermal margin in power-dissipation-sensitive circuits while maintaining identical resistance and tolerance specifications.

For High-Volume Availability: ERJ-6ENF40R2V (126,012 units) and CRCW080540R2FKEA (124,255 units) offer the largest stock quantities, supporting extended production runs and supply chain continuity.

For Compact PCB Layouts: CRCW080540R2FKEA (0.50mm max height) and CR0805-FX-40R2ELF (0.60mm max height) provide the lowest profile options, beneficial for space-constrained designs.

For Non-Automotive Applications: CR0805-FX-40R2ELF and RC0805FR-0740R2L provide moisture-resistant thick film construction without automotive qualification, suitable for industrial and consumer applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF40R2V directly replace ERJ-S06F40R2V? A: Yes. Both parts share identical electrical specifications (40.2Ω ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C), package (0805), and AEC-Q200 qualification. The primary difference is the absence of anti-sulfur coating on the ERJ-6ENF40R2V. For applications not requiring anti-sulfur protection, this part is a direct functional equivalent with significantly higher stock availability.

Q: Is ERJ-P06F40R2V compatible with the original design? A: Yes, with the caveat that it provides higher power rating (0.5W vs. 0.125W). This part is electrically and mechanically compatible and can be used as a drop-in replacement. The increased power rating provides additional thermal margin and is not detrimental to circuit performance.

Q: What is the significance of the height differences among substitute parts? A: Height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances. For most applications, these differences are negligible. However, in space-constrained designs with tight component clearances or automated assembly with height-sensitive fixtures, the lower-profile options (CRCW080540R2FKEA at 0.50mm) may be preferred.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the environmental compliance profile of the ERJ-S06F40R2V.

Q: Which substitute part should be selected for automotive applications? A: For automotive applications requiring AEC-Q200 qualification, select from ERJ-6ENF40R2V, ERJ-P06F40R2V, CRCW080540R2FKEA, or RMCF0805FT40R2. All four parts carry this certification. Selection among these should be based on availability, power rating requirements, and PCB layout constraints.

Q: Can non-AEC-Q200 parts (CR0805-FX-40R2ELF, RC0805FR-0740R2L) be used in automotive designs? A: These parts are not AEC-Q200 qualified and should not be used in applications where this certification is a design requirement. They are suitable for industrial and consumer applications where automotive qualification is not mandated.