ERJ-S06F3R30V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F3R30V is a 3.3 Ohm ±1% 1/8W chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package. This thick film resistor features anti-sulfur properties and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring high reliability. The part is currently in active production status with 754 units available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

ERJ-S06F3R30V

Panasonic Electronic ComponentsIn Stock: 788ERJ-S06F3R30V Datasheet

Current PartRFQ

ERJ-U06F3R30V

Panasonic Electronic ComponentsIn Stock: 5740ERJ-U06F3R30V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S06F3R30V is based on electrical and mechanical parameter equivalence. The substitute part must satisfy all of the following criteria:

• Resistance value: 3.3 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

The ERJ-U06F3R30V meets all specified parameters and is therefore classified as a direct equivalent substitute. The primary difference between the main part and substitute is the series designation (ERJ-S06 versus ERJ-U06), which reflects internal Panasonic product line differentiation while maintaining identical electrical and mechanical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S06F3R30V and ERJ-U06F3R30V are active production parts manufactured by Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements rather than technical performance differences.

The ERJ-S06F3R30V is suitable for applications where the specific series designation is required or preferred. The ERJ-U06F3R30V provides an equivalent alternative with higher current inventory availability (5653 units versus 754 units).

Both parts carry ROHS3 compliance and AEC-Q200 automotive qualification, confirming suitability for automotive and industrial applications operating within the -55°C to 155°C temperature range. The anti-sulfur thick film composition ensures reliability in environments with corrosive atmospheric conditions.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-U06F3R30V be used as a direct replacement for the ERJ-S06F3R30V?

A: Yes. The ERJ-U06F3R30V is a direct equivalent substitute. All electrical parameters (resistance, tolerance, power rating, temperature coefficient), mechanical dimensions (0805 package, 2.00mm x 1.25mm), and compliance certifications (ROHS3, AEC-Q200) are identical.

Q: Are there any differences in performance between the ERJ-S06F3R30V and ERJ-U06F3R30V?

A: No performance differences exist. Both parts are thick film 3.3 Ohm ±1% resistors with identical operating temperature ranges (-55°C to 155°C), temperature coefficients (-100 / +600 ppm/°C), and anti-sulfur automotive qualification.

Q: Will the ERJ-U06F3R30V fit in the same PCB footprint as the ERJ-S06F3R30V?

A: Yes. Both parts use the 0805 (2012 Metric) package with identical dimensions: 0.079" length x 0.049" width (2.00mm x 1.25mm) and maximum seated height of 0.028" (0.70mm).

Q: What is the difference between the ERJ-S06 and ERJ-U06 series?

A: The series designation reflects internal Panasonic product line categorization. From an engineering perspective, both series offer identical electrical and mechanical performance for the 3.3 Ohm ±1% 1/8W 0805 specification.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the ERJ-S06F3R30V and ERJ-U06F3R30V carry AEC-Q200 automotive qualification and anti-sulfur thick film construction, confirming suitability for automotive and industrial applications.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without moisture control requirements.