ERJ-S06F3R00V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F3R00V is a 3 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur construction with automotive AEC-Q200 qualification. The part maintains Active product status with 1112 pieces currently in stock. Substitute parts are identified to address inventory availability, packaging format preferences, or supply chain requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S06F3R00V

Panasonic Electronic ComponentsIn Stock: 1194ERJ-S06F3R00V Datasheet

Current PartRFQ

ERJ-U06F3R00V

Panasonic Electronic ComponentsIn Stock: 6126ERJ-U06F3R00V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F3R00V is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Resistance value: 3 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical & Package Specifications:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Maximum seated height: 0.028" (0.70mm)
• Number of terminations: 2

Compliance & Quality Standards:

• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute part maintains all electrical and mechanical parameters while differing only in packaging format and manufacturer series designation.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S06F3R00V and ERJ-U06F3R00V are Active products manufactured by Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts is determined by packaging format requirements and inventory availability.

ERJ-S06F3R00V is suitable for applications requiring standard packaging with 1112 pieces currently available in inventory.

ERJ-U06F3R00V is suitable for high-volume production environments requiring Tape & Reel (TR) packaging format, with 6031 pieces currently available in inventory.

Both parts satisfy ROHS3 compliance, AEC-Q200 automotive qualification, and anti-sulfur construction requirements. The substitution is direct and interchangeable at the component level, with selection based solely on packaging format and supply chain logistics.

Frequently Asked Questions (FAQ)

Q: Are ERJ-S06F3R00V and ERJ-U06F3R00V electrically identical?

A: Yes. Both parts have identical resistance (3 Ohms), tolerance (±1%), power rating (0.125W), temperature coefficient (-100 / +600 ppm/°C), and operating temperature range (-55°C ~ 155°C).

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. ERJ-S06F3R00V uses standard packaging, while ERJ-U06F3R00V is supplied in Tape & Reel (TR) format. Both parts are from different manufacturer series (ERJ-S06 versus ERJ-U06) but maintain identical specifications.

Q: Can ERJ-U06F3R00V be used as a direct replacement for ERJ-S06F3R00V?

A: Yes, ERJ-U06F3R00V is a direct electrical and mechanical substitute. The component specifications, physical dimensions (0.079" L x 0.049" W), and performance characteristics are identical. Packaging format differences do not affect circuit-level compatibility.

Q: Are both parts AEC-Q200 qualified?

A: Yes. Both ERJ-S06F3R00V and ERJ-U06F3R00V carry AEC-Q200 automotive qualification and anti-sulfur construction.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level (MSL) 1, which indicates Unlimited shelf life under normal storage conditions.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 Compliant.

Q: Which part should be selected for high-volume production?

A: ERJ-U06F3R00V in Tape & Reel (TR) packaging is optimized for high-volume automated assembly processes. The standard packaging format of ERJ-S06F3R00V is suitable for lower-volume or manual assembly applications.