ERJ-S06F3571V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F3571V is a 4.67 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The part is currently active in production with 958 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct circuit board compatibility.

Key Parameters

Parameter	Value
Resistance	4.67 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F3571V are qualified based on the following criteria:

Electrical Match: Resistance value of 4.67 kOhms with ±1% tolerance
Power Rating: 0.125W (1/8W) minimum
Package Compatibility: 0805 (2012 Metric) form factor
Temperature Performance: Operating range of -55°C ~ 155°C with ±100ppm/°C temperature coefficient
Compliance: ROHS3 compliance and MSL 1 rating
Composition: Thick film construction

All identified substitutes meet these core parameters and are available from established manufacturers with active product status.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Features	Height Max	RoHS	MSL
ERJ-S06F3571V	Panasonic	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Anti-Sulfur, AEC-Q200	0.70mm	ROHS3	1
ERJ-6ENF3571V	Panasonic	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.70mm	ROHS3	1
CR0805-FX-3571ELF	Bourns Inc.	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	0.60mm	ROHS3	1
CRCW08053K57FKEA	Vishay Dale	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.50mm	ROHS3	1
RC0805FR-073K57L	YAGEO	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	0.60mm	ROHS3	1
RMCF0805FT3K57	Stackpole Electronics Inc	4.67 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.65mm	ROHS3	1

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard PCB assembly processes. Selection between substitutes should consider the following:

Automotive Applications: ERJ-6ENF3571V, CRCW08053K57FKEA, and RMCF0805FT3K57 carry AEC-Q200 automotive qualification, matching the primary part's automotive-grade specification.

Non-Automotive Applications: CR0805-FX-3571ELF and RC0805FR-073K57L provide moisture-resistant thick film construction suitable for general industrial and consumer applications.

Height Constraints: CRCW08053K57FKEA offers the lowest seated height at 0.50mm, followed by CR0805-FX-3571ELF and RC0805FR-073K57L at 0.60mm. The primary part and ERJ-6ENF3571V are at 0.70mm, while RMCF0805FT3K57 is at 0.65mm. Verify PCB clearance requirements before selection.

Inventory Availability: ERJ-6ENF3571V (44,749 units), RC0805FR-073K57L (50,602 units), and RMCF0805FT3K57 (43,941 units) offer higher stock levels compared to the primary part.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S06F3571V with ERJ-6ENF3571V? A: Yes. Both are Panasonic products with identical electrical specifications (4.67 kΩ ±1%, 0.125W), 0805 package, temperature range (-55°C ~ 155°C), and AEC-Q200 qualification. The primary difference is the absence of anti-sulfur coating on ERJ-6ENF3571V. For applications not requiring anti-sulfur protection, this substitute is directly compatible.

Q: Are all substitute parts suitable for automotive applications? A: No. Only ERJ-6ENF3571V, CRCW08053K57FKEA, and RMCF0805FT3K57 carry AEC-Q200 automotive qualification. CR0805-FX-3571ELF and RC0805FR-073K57L are moisture-resistant but lack automotive certification. Verify application requirements before selection.

Q: What is the significance of the height differences among substitute parts? A: Seated height varies from 0.50mm to 0.70mm across the listed parts. This affects PCB clearance, particularly in high-density layouts or applications with height restrictions. Verify your PCB design clearance specifications before substituting parts with different heights.

Q: Do all substitute parts meet RoHS and MSL requirements? A: Yes. All listed substitutes are ROHS3 compliant with MSL 1 (Unlimited) rating, ensuring compatibility with standard lead-free PCB assembly and storage conditions without moisture baking requirements.

Q: What packaging formats are available? A: ERJ-S06F3571V, ERJ-6ENF3571V, CRCW08053K57FKEA, and RMCF0805FT3K57 are supplied in Tape & Reel (TR) format. RC0805FR-073K57L is available in Cut Tape (CT) & Digi-Reel® format. Confirm packaging compatibility with your assembly process.

Q: Are there differences in temperature coefficient performance? A: No. All parts, including the primary and all substitutes, specify ±100ppm/°C temperature coefficient and operate across the identical -55°C ~ 155°C range, ensuring equivalent thermal performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message