ERJ-S06F3482V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F3482V is a 34.8 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently in active production status with 724 units available in stock.

Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative qualified manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	34.8 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F3482V is determined by strict equivalence across the following parameters:

Resistance value: 34.8 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.125W / 1/8W (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All substitute parts listed below meet these criteria. Variations in physical height, manufacturer-specific features (such as anti-sulfur or moisture-resistant coatings), and AEC-Q200 automotive qualification do not disqualify substitution but represent secondary differentiators for specific application requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	AEC-Q200	Inventory (Pcs)
ERJ-S06F3482V	Panasonic	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Yes	724
ERJ-6ENF3482V	Panasonic	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Yes	35255
AC0805FR-0734K8L	YAGEO	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.024" (0.60mm)	Yes	11164
CR0805-FX-3482ELF	Bourns Inc.	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.024" (0.60mm)	No	18063
CRCW080534K8FKEA	Vishay Dale	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.020" (0.50mm)	Yes	47985
RC0805FR-0734K8L	YAGEO	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.024" (0.60mm)	No	44579
RMCF0805FT34K8	Stackpole Electronics Inc	34.8 kΩ	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.026" (0.65mm)	Yes	50360

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the ERJ-S06F3482V across core parameters. Selection among substitutes should be based on the following criteria:

Automotive Applications (AEC-Q200 Required): ERJ-6ENF3482V (Panasonic), AC0805FR-0734K8L (YAGEO), CRCW080534K8FKEA (Vishay Dale), and RMCF0805FT34K8 (Stackpole Electronics Inc) all carry AEC-Q200 qualification. These parts are suitable for automotive-grade circuit designs.

Non-Automotive Applications: CR0805-FX-3482ELF (Bourns Inc.) and RC0805FR-0734K8L (YAGEO) do not carry AEC-Q200 qualification but remain compliant with ROHS3 and MSL 1 requirements for general industrial and consumer applications.

Supply Availability: CRCW080534K8FKEA (Vishay Dale) offers the highest inventory level at 47,985 units, followed by RMCF0805FT34K8 (Stackpole Electronics Inc) at 50,360 units. ERJ-6ENF3482V (Panasonic) provides 35,255 units as an alternative within the same manufacturer family.

Physical Height Considerations: Component height varies between 0.020" (0.50mm) and 0.028" (0.70mm). For applications with tight PCB clearance constraints, CRCW080534K8FKEA offers the lowest profile at 0.020" maximum seated height.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F3482V be directly replaced with ERJ-6ENF3482V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (34.8 kΩ, ±1%, 0.125W, ±100ppm/°C), operate across -55°C to 155°C, and are packaged in 0805 (2012 Metric) format. The primary difference is the series designation (ERJ-S06 versus ERJ-6EN). Both carry AEC-Q200 qualification. ERJ-6ENF3482V has significantly higher inventory availability.

Q: Are non-AEC-Q200 parts suitable for automotive applications?

A: No. Automotive applications requiring AEC-Q200 qualification must use parts explicitly rated for this standard. CR0805-FX-3482ELF and RC0805FR-0734K8L lack AEC-Q200 certification and are not suitable for automotive-grade designs, regardless of other electrical equivalence.

Q: Does component height affect PCB assembly compatibility?

A: Component height differences (ranging from 0.020" to 0.028" maximum seated height) may impact PCB clearance in designs with tight vertical constraints. Verify PCB layout requirements before substituting parts with different height specifications. All listed parts maintain the same 0805 package footprint and land pattern.

Q: What is the significance of anti-sulfur and moisture-resistant coatings?

A: The ERJ-S06F3482V features anti-sulfur coating; substitute parts may feature moisture-resistant coatings or neither. These are secondary protective features that do not affect core electrical performance. Selection should align with environmental exposure requirements of the specific application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status and MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message