ERJ-S06F3480V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F3480V is a 348 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is specified with anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 931 pieces in stock.

Equivalent and substitute parts are identified when design requirements allow for alternative manufacturers or when supply constraints necessitate component substitution while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	348 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Resistance value: 348 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1

All identified substitute parts meet these core electrical and mechanical specifications. Variations in features (such as automotive AEC-Q200 qualification or moisture resistance coating) and physical dimensions (height seated maximum) do not affect functional substitutability for applications where these features are not explicitly required.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Features	Height Max (mm)	Stock (Pcs)
ERJ-S06F3480V	Panasonic	348 Ω	±1%	0.125	0805	±100	-55 to 155	Anti-Sulfur, AEC-Q200	0.70	931
ERJ-6ENF3480V	Panasonic	348 Ω	±1%	0.125	0805	±100	-55 to 155	AEC-Q200	0.70	244680
CR0805-FX-3480ELF	Bourns Inc.	348 Ω	±1%	0.125	0805	±100	-55 to 155	Moisture Resistant	0.60	25194
CRCW0805348RFKEA	Vishay Dale	348 Ω	±1%	0.125	0805	±100	-55 to 155	AEC-Q200	0.50	20188
RC0805FR-07348RL	YAGEO	348 Ω	±1%	0.125	0805	±100	-55 to 155	Moisture Resistant	0.60	66990
RMCF0805FT348R	Stackpole Electronics Inc	348 Ω	±1%	0.125	0805	±100	-55 to 155	AEC-Q200	0.65	117515

Engineering Selection Recommendations

All substitute parts listed are active production components with ROHS3 compliance and MSL 1 rating, confirming suitability for direct substitution in applications where the ERJ-S06F3480V is specified.

For applications requiring automotive AEC-Q200 qualification, the following parts maintain this certification: ERJ-6ENF3480V (Panasonic), CRCW0805348RFKEA (Vishay Dale), and RMCF0805FT348R (Stackpole Electronics Inc).

For applications where anti-sulfur coating is a design requirement, the ERJ-S06F3480V remains the specified choice. Alternative parts with moisture-resistant coating (CR0805-FX-3480ELF and RC0805FR-07348RL) provide environmental protection through different mechanisms.

Physical height variations (0.50mm to 0.70mm seated maximum) are within typical PCB assembly tolerances for 0805 packages and do not affect electrical performance or standard reflow soldering processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF3480V replace ERJ-S06F3480V in automotive applications?

A: Yes. Both parts are 348 Ohm ±1% 1/8W 0805 thick film resistors with AEC-Q200 qualification, identical electrical specifications, and equivalent operating temperature ranges. The primary difference is the absence of anti-sulfur coating in the ERJ-6ENF3480V. Substitution is valid when anti-sulfur protection is not explicitly required by design specifications.

Q: Are moisture-resistant variants (CR0805-FX-3480ELF, RC0805FR-07348RL) compatible with the original specification?

A: Yes. These parts meet all core electrical and mechanical parameters: 348 Ohm resistance, ±1% tolerance, 0.125W power rating, 0805 package, and identical temperature coefficients and operating ranges. Moisture-resistant coating provides additional environmental protection and does not affect electrical compatibility.

Q: Does the height difference between substitute parts affect PCB assembly?

A: No. All substitute parts have seated maximum heights between 0.50mm and 0.70mm, which falls within standard 0805 package tolerances. These variations do not impact reflow soldering, component placement, or electrical performance.

Q: Which substitute part offers the highest stock availability?

A: ERJ-6ENF3480V (Panasonic) has 244,680 pieces in stock, providing the largest available inventory among all listed equivalents.

Q: Can non-AEC-Q200 parts substitute in automotive designs?

A: Substitution depends on design requirements. If AEC-Q200 qualification is mandatory, use only ERJ-6ENF3480V, CRCW0805348RFKEA, or RMCF0805FT348R. If automotive qualification is not specified, CR0805-FX-3480ELF and RC0805FR-07348RL are electrically equivalent alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message