ERJ-S06F2R20V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2R20V is a 2.2 Ohm ±1% 1/8W chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring high reliability. The part is currently in active production status with 833 pieces available in inventory. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory constraints require component alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

ERJ-S06F2R20V

Panasonic Electronic ComponentsIn Stock: 857ERJ-S06F2R20V Datasheet

Current PartRFQ

ERJ-U06F2R20V

Panasonic Electronic ComponentsIn Stock: 5690ERJ-U06F2R20V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S06F2R20V is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part ERJ-U06F2R20V qualifies as a direct equivalent based on the following matching criteria:

Electrical Parameters:

• Identical resistance value: 2.2 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.125W (1/8W)
• Identical temperature coefficient: -100 / +600 ppm/°C
• Identical operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Identical package: 0805 (2012 Metric)
• Identical physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Identical seated height: 0.028" (0.70mm)
• Identical termination count: 2

Compliance & Features:

• Identical composition: Thick Film
• Identical features: Anti-Sulfur, Automotive AEC-Q200
• Identical RoHS status: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)
• Identical REACH status: REACH Unaffected

The substitute part differs only in the base product series designation (ERJ-U06 versus ERJ-S06), which represents a manufacturing series variation within Panasonic's product line while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S06F2R20V and ERJ-U06F2R20V are active production parts manufactured by Panasonic Electronic Components with full compliance to automotive and environmental standards. Selection between these parts is based on availability and supply chain requirements rather than technical differentiation.

ERJ-S06F2R20V is the primary specification part with 833 pieces currently in stock. This part number should be used as the first choice when available.

ERJ-U06F2R20V is the qualified substitute with 5,644 pieces in inventory. This part provides enhanced supply availability and serves as the alternative when the primary part number is unavailable or when higher stock quantities are required for production planning.

Both parts carry identical AEC-Q200 automotive qualification, ROHS3 compliance, and REACH unaffected status, confirming their suitability for automotive and industrial applications without any compliance restrictions. The parts are interchangeable at the circuit design level with no modifications to PCB layout, schematic, or assembly procedures required.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U06F2R20V be used as a direct replacement for ERJ-S06F2R20V in automotive applications?

A: Yes. Both parts are AEC-Q200 qualified with identical electrical specifications, mechanical dimensions, and automotive-grade features. No circuit modifications are required for substitution.

Q: Are there any differences in the 0805 package footprint between these two part numbers?

A: No. Both parts use the identical 0805 (2012 Metric) package with matching physical dimensions of 0.079" L x 0.049" W and seated height of 0.028" (0.70mm). PCB footprints are interchangeable.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both ERJ-S06F2R20V and ERJ-U06F2R20V are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. No compliance differences exist between the parts.

Q: What is the difference between the ERJ-S06 and ERJ-U06 series designations?

A: The series designation indicates the manufacturing series within Panasonic's product line. Both series produce identical electrical and mechanical specifications for this 2.2 Ohm 1% 1/8W 0805 resistor. The difference is internal to Panasonic's manufacturing and does not affect circuit performance or compatibility.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both parts operate across the identical temperature range of -55°C ~ 155°C with matching temperature coefficient of -100 / +600 ppm/°C. No performance differentiation exists across the specified operating temperature range.

Q: Is there a preference between these parts for new designs?

A: Selection should be based on supply chain availability and inventory requirements. Both parts are active production items with full automotive qualification. Either part number is acceptable for new designs without technical restrictions.