ERJ-S06F2R00V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2R00V is a 2 Ohm ±1% 0.125W (1/8W) chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently in active production status with 922 pieces available in stock. Substitute parts are identified to address inventory availability, packaging format requirements, or supply chain continuity needs while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F2R00V

Panasonic Electronic ComponentsIn Stock: 994ERJ-S06F2R00V Datasheet

Current PartRFQ

ERJ-U06F2R00V

Panasonic Electronic ComponentsIn Stock: 5862ERJ-U06F2R00V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S06F2R00V is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 2 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height - Seated (Max): 0.028" (0.70mm)
• Number of terminations: 2

Compliance & Certification Parameters:

• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The ERJ-U06F2R00V qualifies as a direct substitute based on identical electrical specifications, mechanical compatibility, and compliance certifications. The primary difference is the packaging format (Tape & Reel versus standard packaging) and higher inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S06F2R00V and ERJ-U06F2R00V are active production parts manufactured by Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts is based on the following criteria:

ERJ-S06F2R00V is appropriate for applications requiring standard packaging formats with moderate inventory requirements.

ERJ-U06F2R00V is appropriate for high-volume production environments, automated assembly processes, or applications requiring Tape & Reel packaging. This part offers significantly higher inventory availability (5800 pieces versus 922 pieces).

Both parts maintain full compliance with ROHS3, REACH, and AEC-Q200 automotive qualification standards. The thick film composition with anti-sulfur coating ensures reliability in harsh automotive environments across the operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U06F2R00V be used as a direct replacement for ERJ-S06F2R00V in circuit design?

A: Yes. Both parts are electrically and mechanically identical with 2 Ohm ±1% resistance, 0.125W power rating, 0805 package format, and identical operating specifications. The primary difference is packaging format (Tape & Reel versus standard).

Q: What is the difference between ERJ-S06 and ERJ-U06 series designations?

A: The series designation reflects the packaging format. ERJ-S06 uses standard packaging, while ERJ-U06 uses Tape & Reel (TR) packaging. Electrical and mechanical specifications are identical.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERJ-S06F2R00V and ERJ-U06F2R00V carry AEC-Q200 automotive qualification and feature anti-sulfur coating for harsh environment reliability.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across -55°C to 155°C with a temperature coefficient of -100 / +600 ppm/°C.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected.

Q: What is the moisture sensitivity level (MSL) for these parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Can these 0805 resistors be used in high-density PCB layouts?

A: Yes. The 0805 (2012 Metric) package with dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.028" (0.70mm) is suitable for standard PCB assembly processes and high-density layouts.