ERJ-S06F26R1V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F26R1V is a 26.1 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is active in production with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and automotive qualification requirements.

Substiute Parts

ERJ-S06F26R1V

Panasonic Electronic ComponentsIn Stock: 899ERJ-S06F26R1V Datasheet

Current PartRFQ

ERJ-6ENF26R1V

Panasonic Electronic ComponentsIn Stock: 79241ERJ-6ENF26R1V Datasheet

SimilarRFQ

CRCW080526R1FKEA

Vishay DaleIn Stock: 14893CRCW080526R1FKEA Datasheet

SimilarRFQ

RC0805FR-0726R1L

YAGEOIn Stock: 158140RC0805FR-0726R1L Datasheet

SimilarRFQ

RMCF0805FT26R1

Stackpole Electronics IncIn Stock: 934RMCF0805FT26R1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F26R1V are qualified based on the following criteria:

• Resistance value: 26.1 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical specifications. Variations in physical height and packaging format (Tape & Reel vs. Cut Tape) do not affect functional interchangeability in standard PCB assembly processes.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production components with full RoHS3 compliance and MSL 1 rating. Selection among these equivalents should be based on:

• Availability and lead time requirements
• Packaging format preference (Tape & Reel or Cut Tape & Digi-Reel)
• Specific application requirements for automotive qualification (AEC-Q200 rated: ERJ-S06F26R1V, ERJ-6ENF26R1V, CRCW080526R1FKEA, RMCF0805FT26R1)
• Physical height constraints in PCB assembly (CRCW080526R1FKEA has lowest maximum height at 0.020")
• Supplier inventory and cost considerations

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF26R1V be used as a direct replacement for ERJ-S06F26R1V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (26.1 Ω ±1%, 0.125W), operate across the same temperature range (-55°C ~ 155°C), and are packaged in 0805 format with AEC-Q200 automotive qualification. The primary difference is the series designation (ERJ-S06 vs. ERJ-6EN).

Q: Are all substitute parts AEC-Q200 qualified?

A: ERJ-S06F26R1V, ERJ-6ENF26R1V, CRCW080526R1FKEA, and RMCF0805FT26R1 carry AEC-Q200 automotive qualification. RC0805FR-0726R1L from YAGEO does not list AEC-Q200 rating but features moisture-resistant thick film construction.

Q: Do physical height differences affect PCB assembly compatibility?

A: Height variations (0.020" to 0.028" maximum seated height) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are suitable for standard reflow soldering processes.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Unlimited) indicates these components have unlimited shelf life and require no special moisture control during storage or handling, simplifying supply chain management and reducing component preparation requirements.

Q: Can these parts be used interchangeably in non-automotive applications?

A: Yes. All substitute parts meet the core electrical and mechanical specifications required for general-purpose 26.1 Ohm ±1% 0.125W resistor applications. Automotive qualification is an additional feature not required for non-automotive use.