ERJ-S06F2402V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2402V is a 24 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is active and currently in stock with 643 units available. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design requirements across multiple manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	24 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Ratings	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: resistance value (24 kOhms), tolerance (±1%), package type (0805 / 2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99).

Substitute parts are grouped into two categories:

Category 1: Direct Equivalents (0.125W / 1/8W Rating) Parts with identical power rating, all electrical parameters, and package dimensions. These parts are fully interchangeable with the ERJ-S06F2402V without circuit redesign.

Category 2: Higher Power Rating Variants (0.5W / 1/2W Rating) Parts with identical resistance, tolerance, package, and temperature characteristics but rated for 0.5W power dissipation. These parts are electrically compatible and mechanically fit the same footprint but provide enhanced pulse withstanding capability. Selection depends on circuit power requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Height Max (mm)	Inventory
ERJ-S06F2402V	Panasonic	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.70	643
ERJ-6ENF2402V	Panasonic	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.70	43030
CRG0805F24K	TE Connectivity	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	No	0.65	56815
AC0805FR-0724KL	YAGEO	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.60	58960
CR0805-FX-2402ELF	Bourns Inc.	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	No	0.60	30138
CRCW080524K0FKEA	Vishay Dale	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.50	47032
CRCW080524K0FKEAHP	Vishay Dale	24 kOhms	±1%	0.5	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.50	4359
RC0805FR-0724KL	YAGEO	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	No	0.60	109290
RCS080524K0FKEA	Vishay Dale	24 kOhms	±1%	0.5	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.50	5790
RMCF0805FT24K0	Stackpole Electronics	24 kOhms	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	Yes	0.65	82947

Engineering Selection Recommendations

For AEC-Q200 Automotive Applications: ERJ-6ENF2402V (Panasonic), AC0805FR-0724KL (YAGEO), CRCW080524K0FKEA (Vishay Dale), CRCW080524K0FKEAHP (Vishay Dale), RCS080524K0FKEA (Vishay Dale), and RMCF0805FT24K0 (Stackpole Electronics) all carry AEC-Q200 certification and are suitable for automotive designs requiring this qualification.

For Non-Automotive Applications: CRG0805F24K (TE Connectivity), CR0805-FX-2402ELF (Bourns Inc.), and RC0805FR-0724KL (YAGEO) are suitable for general industrial and consumer applications where AEC-Q200 is not required.

For Higher Power Dissipation: CRCW080524K0FKEAHP and RCS080524K0FKEA provide 0.5W rating with pulse withstanding capability while maintaining the same 0805 package footprint and all other electrical parameters.

For Supply Chain Continuity: RC0805FR-0724KL offers the highest inventory availability (109,290 units) among all substitutes. ERJ-6ENF2402V (43,030 units) and RMCF0805FT24K0 (82,947 units) provide strong alternative sources.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated resistor (CRCW080524K0FKEAHP or RCS080524K0FKEA) as a direct replacement for the 0.125W ERJ-S06F2402V?

A: Yes. The 0.5W variants are electrically and mechanically compatible. They fit the same 0805 footprint and share identical resistance, tolerance, temperature coefficient, and operating temperature range. The higher power rating provides additional margin but does not affect circuit operation at lower power levels.

Q: Are all substitute parts ROHS3 compliant?

A: All listed substitute parts are ROHS3 compliant. Compliance status is identical across all options.

Q: What is the difference between parts with and without AEC-Q200 certification?

A: AEC-Q200 certification indicates the part meets automotive industry reliability and quality standards. Parts without this certification are suitable for non-automotive applications. For automotive designs, select only AEC-Q200 rated parts: ERJ-6ENF2402V, AC0805FR-0724KL, CRCW080524K0FKEA, CRCW080524K0FKEAHP, RCS080524K0FKEA, or RMCF0805FT24K0.

Q: Do package height differences affect PCB assembly?

A: All parts use the 0805 (2012 Metric) package with maximum seated heights ranging from 0.50mm to 0.70mm. These minor variations are within standard PCB assembly tolerances and do not affect reflow soldering or component placement on standard equipment.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-0724KL (YAGEO) has the highest inventory at 109,290 units. For AEC-Q200 applications, RMCF0805FT24K0 (Stackpole Electronics) offers 82,947 units.

Q: Can I mix different manufacturers in the same design?

A: Yes. All listed parts meet identical electrical specifications (24 kOhms ±1%, 0.125W or 0.5W, ±100ppm/°C, -55°C ~ 155°C). They are mechanically and electrically interchangeable within their respective power rating categories.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message