ERJ-S06F2373V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2373V is a 237 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is actively produced and features anti-sulfur coating with automotive AEC-Q200 qualification. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit applications.

Substiute Parts

ERJ-S06F2373V

Panasonic Electronic ComponentsIn Stock: 816ERJ-S06F2373V Datasheet

Current PartRFQ

ERJ-6ENF2373V

Panasonic Electronic ComponentsIn Stock: 72701ERJ-6ENF2373V Datasheet

SimilarRFQ

CR0805-FX-2373ELF

Bourns Inc.In Stock: 39923CR0805-FX-2373ELF Datasheet

SimilarRFQ

CRCW0805237KFKEA

Vishay DaleIn Stock: 14289CRCW0805237KFKEA Datasheet

SimilarRFQ

RC0805FR-07237KL

YAGEOIn Stock: 232728RC0805FR-07237KL Datasheet

SimilarRFQ

RMCF0805FT237K

Stackpole Electronics IncIn Stock: 7839RMCF0805FT237K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F2373V are qualified based on the following criteria:

• Resistance Value: 237 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All identified substitute parts meet these electrical and mechanical parameters. Variations in features (such as automotive AEC-Q200 certification or moisture resistance coating) do not affect core substitution eligibility but are noted for application-specific requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for direct replacement in the ERJ-S06F2373V application. Selection between substitutes depends on application requirements:

For automotive applications requiring AEC-Q200 qualification, ERJ-6ENF2373V, CRCW0805237KFKEA, and RMCF0805FT237K are qualified options. ERJ-6ENF2373V maintains the same manufacturer lineage as the primary part.

For general industrial applications where moisture resistance is prioritized, CR0805-FX-2373ELF and RC0805FR-07237KL offer moisture-resistant thick film construction.

All parts share identical electrical parameters (237 kOhms, ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range) and package dimensions (0805, 2.00mm x 1.25mm), ensuring functional equivalence. Seated height variations (0.50mm to 0.70mm) are within standard PCB assembly tolerances and do not affect circuit performance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2373V replace ERJ-S06F2373V directly?

A: Yes. Both parts share identical electrical specifications (237 kOhms ±1%, 0.125W), package (0805), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and compliance ratings (ROHS3, MSL 1). The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and the absence of anti-sulfur coating on ERJ-6ENF2373V. For non-sulfur-sensitive applications, direct substitution is valid.

Q: Are Bourns CR0805-FX-2373ELF and YAGEO RC0805FR-07237KL suitable for automotive applications?

A: CR0805-FX-2373ELF and RC0805FR-07237KL are not AEC-Q200 qualified. They are suitable for general industrial and consumer applications. For automotive applications requiring AEC-Q200 certification, use ERJ-6ENF2373V, CRCW0805237KFKEA, or RMCF0805FT237K.

Q: Do seated height differences affect PCB assembly?

A: Seated height variations among substitutes range from 0.50mm to 0.70mm. These differences fall within standard PCB assembly process tolerances and do not affect reflow soldering, component placement, or circuit performance. All parts are compatible with standard 0805 footprints.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, confirming compliance with environmental and handling standards.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating (ERJ-S06F2373V) protects against sulfur-containing atmospheric contaminants in industrial environments. Moisture-resistant coating (CR0805-FX-2373ELF, RC0805FR-07237KL) protects against humidity and moisture ingress. Selection depends on the specific environmental conditions of the application.