ERJ-S06F2323V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2323V is a 232 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The part is currently active in production with 1082 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct circuit board compatibility.

Substiute Parts

ERJ-S06F2323V

Panasonic Electronic ComponentsIn Stock: 1097ERJ-S06F2323V Datasheet

Current PartRFQ

ERJ-6ENF2323V

Panasonic Electronic ComponentsIn Stock: 37788ERJ-6ENF2323V Datasheet

SimilarRFQ

CRCW0805232KFKEA

Vishay DaleIn Stock: 19764CRCW0805232KFKEA Datasheet

SimilarRFQ

RC0805FR-07232KL

YAGEOIn Stock: 52849RC0805FR-07232KL Datasheet

SimilarRFQ

RMCF0805FT232K

Stackpole Electronics IncIn Stock: 24816RMCF0805FT232K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F2323V are qualified based on the following criteria:

Electrical Parameters: Resistance value (232 kOhms), tolerance (±1%), power rating (0.125W), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C) must match exactly.

Mechanical Parameters: Package type (0805 / 2012 Metric), physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm), and number of terminations (2) must be identical to ensure PCB footprint compatibility.

Compliance & Certifications: RoHS3 compliance and MSL Level 1 rating are required. Automotive AEC-Q200 qualification is present in the main part and most substitutes, indicating suitability for automotive applications.

Composition: Thick film construction is consistent across all qualified substitutes.

All identified substitute parts meet these criteria and are suitable for direct replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL Level 1 rating, confirming their suitability for direct replacement in the ERJ-S06F2323V application.

For Automotive Applications: ERJ-6ENF2323V, CRCW0805232KFKEA, and RMCF0805FT232K carry AEC-Q200 qualification, matching the automotive-grade specification of the primary part. These are preferred for automotive circuit designs.

For Non-Automotive Applications: RC0805FR-07232KL is qualified for moisture-resistant applications without automotive certification. This part is suitable for general industrial and consumer electronics where AEC-Q200 is not required.

Height Considerations: All substitute parts have maximum seated heights between 0.020" and 0.028", within typical PCB assembly tolerances. CRCW0805232KFKEA has the lowest profile at 0.020" (0.50mm), while ERJ-6ENF2323V and ERJ-S06F2323V share the same 0.028" (0.70mm) height.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2323V replace ERJ-S06F2323V directly? A: Yes. Both parts are manufactured by Panasonic with identical electrical specifications (232 kΩ ±1%, 0.125W), package dimensions (0805), temperature range (-55°C ~ 155°C), and compliance ratings (AEC-Q200, ROHS3, MSL 1). The primary difference is the series designation (ERJ-6EN vs. ERJ-S06), reflecting different product lines with equivalent performance.

Q: What is the difference between AEC-Q200 qualified and non-qualified parts? A: AEC-Q200 qualification indicates the part meets automotive industry reliability standards for temperature cycling, moisture resistance, and failure rate testing. RC0805FR-07232KL lacks this certification but remains suitable for non-automotive applications. For automotive designs, use AEC-Q200 qualified substitutes.

Q: Are all substitute parts compatible with the same PCB footprint? A: Yes. All parts use the 0805 (2012 Metric) package with identical land pattern dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variations (0.020" to 0.028") are within standard PCB assembly tolerances and do not affect footprint compatibility.

Q: Which substitute has the best availability? A: RC0805FR-07232KL has the highest stock level at 52,776 units. ERJ-6ENF2323V follows with 37,774 units. For automotive-qualified parts, ERJ-6ENF2323V offers the best availability.

Q: Do all substitutes have the same temperature coefficient? A: Yes. All parts, including the main part ERJ-S06F2323V, have a temperature coefficient of ±100ppm/°C and operate across the identical temperature range of -55°C to 155°C.

Q: Is moisture sensitivity a concern for these parts? A: No. All parts carry MSL Level 1 (Unlimited) rating, indicating unlimited shelf life without moisture baking requirements. Standard storage conditions are sufficient.