ERJ-S06F2320V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2320V is a 232 Ohm ±1% 1/8W (0.125W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently active in production with 1008 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative qualified sources while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	232 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F2320V is determined by strict equivalence across the following critical parameters:

Resistance value: 232 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.125W / 1/8W (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All substitute parts listed below meet these criteria. Variations in height (seated maximum) and specific feature sets (anti-sulfur vs. moisture resistant vs. automotive AEC-Q200) do not affect functional substitution but may influence application-specific selection.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height Max (mm)	Features	Status	Stock (Pcs)
ERJ-S06F2320V	Panasonic	232 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.70	Anti-Sulfur, AEC-Q200	Active	1008
ERJ-6ENF2320V	Panasonic	232 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.70	AEC-Q200	Active	65603
CRCW0805232RFKEA	Vishay Dale	232 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.50	AEC-Q200	Active	17982
RC0805FR-07232RL	YAGEO	232 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.60	Moisture Resistant	Active	27704
RMCF0805FT232R	Stackpole Electronics	232 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.65	AEC-Q200	Active	10665

Engineering Selection Recommendations

All listed substitute parts are active production components with ROHS3 compliance and MSL 1 rating, confirming suitability for direct substitution in applications currently using the ERJ-S06F2320V.

Panasonic ERJ-6ENF2320V: Highest stock availability (65,603 units). Manufactured by the same supplier as the primary part. Lacks anti-sulfur feature but maintains AEC-Q200 automotive qualification. Recommended for high-volume procurement and applications where anti-sulfur coating is not a design requirement.

Vishay Dale CRCW0805232RFKEA: Lowest seated height (0.50mm) among all options. Maintains AEC-Q200 qualification. Suitable for space-constrained PCB layouts where component height is a critical design parameter.

YAGEO RC0805FR-07232RL: Largest stock availability (27,704 units). Features moisture-resistant coating instead of automotive qualification. Recommended for consumer and industrial applications where moisture resistance is prioritized over automotive certification.

Stackpole Electronics RMCF0805FT232R: Moderate stock availability (10,665 units). Maintains AEC-Q200 automotive qualification. Suitable for automotive applications requiring qualified component sourcing from alternative manufacturers.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S06F2320V with any of these parts without circuit redesign?

A: Yes. All listed parts are electrically and mechanically equivalent. They share identical resistance (232 Ω), tolerance (±1%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). No circuit redesign is required.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating (ERJ-S06F2320V) protects against sulfur-containing atmospheric contaminants common in automotive environments. Moisture-resistant coating (RC0805FR-07232RL) protects against humidity and moisture ingress. Selection depends on the specific environmental exposure of the application.

Q: Does the height difference between parts affect PCB assembly?

A: Height variations (0.50mm to 0.70mm seated maximum) are within standard 0805 package tolerances and do not affect standard PCB assembly processes. However, applications with strict height constraints should verify compatibility with the specific part selected.

Q: Are all substitute parts AEC-Q200 qualified?

A: ERJ-6ENF2320V, CRCW0805232RFKEA, and RMCF0805FT232R carry AEC-Q200 automotive qualification. RC0805FR-07232RL does not list AEC-Q200 rating but features moisture-resistant coating. For automotive applications requiring AEC-Q200 certification, select from the three qualified alternatives.

Q: Which substitute offers the best supply availability?

A: YAGEO RC0805FR-07232RL has the highest stock level (27,704 units), followed by Panasonic ERJ-6ENF2320V (65,603 units). Both provide excellent supply security for high-volume applications.

Q: Can I mix different substitute parts in the same production batch?

A: Yes. All parts meet identical electrical specifications and package requirements. Mixing is acceptable from an engineering standpoint, though procurement and quality documentation practices may require tracking by part number for traceability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message