ERJ-S06F2150V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2150V is a 215 Ohms ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 1108 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit designs.

Substiute Parts

ERJ-S06F2150V

Panasonic Electronic ComponentsIn Stock: 1209ERJ-S06F2150V Datasheet

Current PartRFQ

ERJ-6ENF2150V

Panasonic Electronic ComponentsIn Stock: 93326ERJ-6ENF2150V Datasheet

SimilarRFQ

CRCW0805215RFKEA

Vishay DaleIn Stock: 19965CRCW0805215RFKEA Datasheet

SimilarRFQ

RC0805FR-07215RL

YAGEOIn Stock: 267840RC0805FR-07215RL Datasheet

SimilarRFQ

RMCF0805FT215R

Stackpole Electronics IncIn Stock: 6052RMCF0805FT215R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F2150V are qualified based on the following criteria:

• Resistance value: 215 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Composition: Thick Film
• RoHS3 compliance
• MSL 1 rating

All identified substitutes meet these core electrical and mechanical parameters. Automotive AEC-Q200 qualification is present in the main part and most substitutes, indicating suitability for automotive applications. Packaging format (Tape & Reel or Cut Tape) may vary but does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming environmental and regulatory compatibility with the ERJ-S06F2150V.

For automotive applications requiring AEC-Q200 qualification, the following parts are directly equivalent:

• ERJ-6ENF2150V (Panasonic)
• CRCW0805215RFKEA (Vishay Dale)
• RMCF0805FT215R (Stackpole Electronics)

The RC0805FR-07215RL (YAGEO) meets all electrical and mechanical specifications but lacks AEC-Q200 certification. This part is suitable for non-automotive applications or where automotive qualification is not required.

Height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are available in production quantities.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2150V replace ERJ-S06F2150V directly? A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (215 Ω ±1%, 0.125W), operate across -55°C to 155°C, carry AEC-Q200 automotive qualification, and are packaged in 0805 (2012 Metric) format. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06).

Q: Is CRCW0805215RFKEA suitable for automotive applications? A: Yes. The CRCW0805215RFKEA is manufactured by Vishay Dale, meets all electrical and mechanical parameters of the ERJ-S06F2150V, and carries AEC-Q200 automotive qualification. The lower maximum height (0.50mm vs. 0.70mm) remains within 0805 package specifications.

Q: Why does RC0805FR-07215RL lack AEC-Q200 certification? A: The RC0805FR-07215RL is a YAGEO product designed for general industrial and consumer applications. It meets all electrical specifications and RoHS3 compliance but is not qualified to automotive AEC-Q200 standards. Use this part only in non-automotive circuits or where automotive qualification is not a design requirement.

Q: Are packaging format differences (Tape & Reel vs. Cut Tape) significant? A: Packaging format affects supply chain logistics and handling but does not impact electrical or mechanical performance. All listed parts are available in standard packaging formats suitable for automated assembly processes.

Q: Can these substitutes be used interchangeably on the same PCB? A: Yes, within the constraints of your application requirements. All substitutes share the 0805 package footprint, identical electrical specifications, and compatible operating temperature ranges. For automotive designs, confirm that your selected substitute carries AEC-Q200 certification.