ERJ-S06F2103V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2103V is a 210 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The product is active and widely available. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct functional replacement in circuit designs.

Key Parameters

Parameter	Value
Resistance	210 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Ratings	AEC-Q200 (Automotive)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ERJ-S06F2103V is determined by strict equivalence across the following parameters:

Resistance value: 210 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Moisture sensitivity level: 1 (Unlimited)
RoHS compliance: ROHS3 Compliant

All identified substitute parts meet these core electrical and mechanical requirements. Automotive AEC-Q200 rating and moisture-resistant features are present in most substitutes, with variations noted in the comparison table below.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Height (Max)	RoHS	MSL
ERJ-S06F2103V	Panasonic	210 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	0.70mm	ROHS3	1
ERJ-6ENF2103V	Panasonic	210 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	0.70mm	ROHS3	1
CRCW0805210KFKEA	Vishay Dale	210 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	0.50mm	ROHS3	1
RC0805FR-07210KL	YAGEO	210 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	No	0.60mm	ROHS3	1
RMCF0805FT210K	Stackpole Electronics	210 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Yes	0.65mm	ROHS3	1

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for direct replacement in the ERJ-S06F2103V application.

For automotive applications requiring AEC-Q200 certification, the following parts are qualified: ERJ-6ENF2103V (Panasonic), CRCW0805210KFKEA (Vishay Dale), and RMCF0805FT210K (Stackpole Electronics).

The RC0805FR-07210KL (YAGEO) does not carry AEC-Q200 rating but meets all electrical and mechanical parameters. This part is suitable for non-automotive applications or where automotive qualification is not required.

Height variation across substitutes ranges from 0.50mm to 0.70mm. In space-constrained designs, the CRCW0805210KFKEA offers the lowest profile at 0.50mm maximum seated height.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2103V replace ERJ-S06F2103V directly?

A: Yes. Both parts share identical electrical specifications (210 kΩ ±1%, 0.125W), package (0805), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and compliance ratings (AEC-Q200, ROHS3, MSL 1). The primary difference is the series designation (ERJ-6EN vs. ERJ-S06), reflecting different manufacturing lines within Panasonic.

Q: Is the YAGEO RC0805FR-07210KL suitable for automotive designs?

A: The RC0805FR-07210KL meets all electrical and mechanical requirements but does not carry AEC-Q200 automotive qualification. Use this part only in non-automotive applications or where automotive certification is not mandated by design specifications.

Q: What is the significance of height differences among substitutes?

A: Height variation (0.50mm to 0.70mm) affects PCB assembly clearance and component stacking in high-density layouts. The CRCW0805210KFKEA at 0.50mm provides the lowest profile, while the ERJ-S06F2103V and ERJ-6ENF2103V at 0.70mm are the tallest. Verify PCB design constraints before selecting based on height.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, matching the original ERJ-S06F2103V packaging format for automated assembly compatibility.

Q: Do all substitutes meet RoHS and moisture sensitivity requirements?

A: Yes. All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) rating, matching the environmental and compliance profile of the ERJ-S06F2103V.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message