ERJ-S06F2050V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F2050V is a 205 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is active in production with 795 units currently in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct functional interchangeability in circuit designs.

Substiute Parts

ERJ-S06F2050V

Panasonic Electronic ComponentsIn Stock: 806ERJ-S06F2050V Datasheet

Current PartRFQ

ERJ-6ENF2050V

Panasonic Electronic ComponentsIn Stock: 54839ERJ-6ENF2050V Datasheet

SimilarRFQ

CR0805-FX-2050ELF

Bourns Inc.In Stock: 20655CR0805-FX-2050ELF Datasheet

SimilarRFQ

CRCW0805205RFKEA

Vishay DaleIn Stock: 22915CRCW0805205RFKEA Datasheet

SimilarRFQ

RC0805FR-07205RL

YAGEOIn Stock: 48580RC0805FR-07205RL Datasheet

SimilarRFQ

RMCF0805FT205R

Stackpole Electronics IncIn Stock: 5367RMCF0805FT205R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F2050V are qualified based on the following criteria:

• Resistance value: 205 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• Moisture Sensitivity Level 1

All identified substitute parts meet these core electrical and mechanical specifications. Differences in features (such as anti-sulfur coating versus moisture resistance) and automotive certifications are noted but do not prevent functional substitution when application requirements permit.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and Moisture Sensitivity Level 1 rating, ensuring compatibility with standard PCB assembly processes and storage conditions.

For automotive applications requiring AEC-Q200 qualification, the following parts are directly equivalent to ERJ-S06F2050V:

• ERJ-6ENF2050V (Panasonic) — Same manufacturer, highest inventory availability
• CRCW0805205RFKEA (Vishay Dale) — Established automotive supplier
• RMCF0805FT205R (Stackpole Electronics Inc) — Automotive-qualified alternative

For general-purpose applications where AEC-Q200 certification is not required, moisture-resistant alternatives provide equivalent electrical performance:

• CR0805-FX-2050ELF (Bourns Inc.)
• RC0805FR-07205RL (YAGEO)

All parts share identical electrical specifications (205 Ω, ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range) and 0805 package footprint, enabling direct PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2050V replace ERJ-S06F2050V directly?

A: Yes. Both are Panasonic 205 Ω ±1% 1/8W 0805 resistors with AEC-Q200 qualification and identical electrical specifications. The primary difference is the absence of anti-sulfur coating in the ERJ-6ENF2050V series. For applications not requiring anti-sulfur protection, this part is a direct functional equivalent.

Q: What is the difference between AEC-Q200 qualified and non-qualified parts?

A: AEC-Q200 qualification indicates the part meets automotive reliability standards including stress testing and failure rate requirements. Parts without this certification (CR0805-FX-2050ELF, RC0805FR-07205RL) are suitable for general industrial and consumer applications but should not be used in automotive designs requiring AEC-Q200 compliance.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All listed parts use the 0805 (2012 Metric) package with identical land pattern dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variations (0.020" to 0.028" seated maximum) are within standard PCB assembly tolerances and do not affect placement or soldering.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All parts listed carry MSL 1 rating, eliminating the need for pre-reflow drying procedures during assembly.

Q: Can I use CR0805-FX-2050ELF or RC0805FR-07205RL in an automotive application?

A: These parts lack AEC-Q200 certification. Use only in automotive applications where AEC-Q200 qualification is not a design requirement. For safety-critical automotive systems, select AEC-Q200 qualified alternatives.

Q: Which substitute offers the best inventory availability?

A: ERJ-6ENF2050V (Panasonic) has the highest inventory at 54,814 units, followed by RC0805FR-07205RL (YAGEO) at 48,560 units.