Equivalent & Substitute Parts for ERJ-S06F1961V

Part Overview

The ERJ-S06F1961V is a 1.96 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The part is currently active in production with 847 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative qualified sources while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F1961V

Panasonic Electronic ComponentsIn Stock: 881ERJ-S06F1961V Datasheet

Current PartRFQ

ERJ-6ENF1961V

Panasonic Electronic ComponentsIn Stock: 63475ERJ-6ENF1961V Datasheet

SimilarRFQ

AC0805FR-071K96L

YAGEOIn Stock: 9718AC0805FR-071K96L Datasheet

SimilarRFQ

CR0805-FX-1961ELF

Bourns Inc.In Stock: 25579CR0805-FX-1961ELF Datasheet

SimilarRFQ

CRCW08051K96FKEA

Vishay DaleIn Stock: 21902CRCW08051K96FKEA Datasheet

SimilarRFQ

RC0805FR-071K96L

YAGEOIn Stock: 52022RC0805FR-071K96L Datasheet

SimilarRFQ

RMCF0805FT1K96

Stackpole Electronics IncIn Stock: 28919RMCF0805FT1K96 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1961V is determined by strict equivalence across the following critical parameters:

• Resistance Value: 1.96 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All substitute parts listed below meet these criteria. Secondary parameters such as height-seated maximum, specific feature sets (anti-sulfur, moisture resistant, automotive AEC-Q200), and packaging format (Tape & Reel vs. Cut Tape) do not disqualify substitution but may influence selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the ERJ-S06F1961V based on matching resistance, tolerance, power rating, package, composition, temperature coefficient, operating temperature range, RoHS compliance, and moisture sensitivity level.

For applications requiring automotive AEC-Q200 qualification, the following parts are qualified: ERJ-6ENF1961V (Panasonic), AC0805FR-071K96L (YAGEO), CRCW08051K96FKEA (Vishay Dale), and RMCF0805FT1K96 (Stackpole Electronics Inc).

For applications where automotive qualification is not required, CR0805-FX-1961ELF (Bourns Inc.) and RC0805FR-071K96L (YAGEO) are electrically and mechanically equivalent alternatives.

Packaging format considerations: RC0805FR-071K96L is supplied in Cut Tape (CT) & Digi-Reel® format, while all other substitutes are supplied in Tape & Reel (TR) format. This distinction affects handling and assembly processes but does not impact electrical performance.

Height-seated maximum variations (0.020" to 0.028") are within standard 0805 package tolerances and do not affect PCB layout compatibility for standard 0805 footprints.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1961V replace ERJ-S06F1961V directly?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (1.96 kOhms ±1%, 0.125W), operate across -55°C to 155°C, carry ROHS3 compliance, and are packaged in 0805 (2012 Metric) format. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06), which reflects different manufacturing lines but equivalent performance characteristics.

Q: Are YAGEO AC0805FR-071K96L and RC0805FR-071K96L interchangeable?

A: Both YAGEO parts meet all electrical and mechanical substitution criteria. The key difference is packaging format: AC0805FR-071K96L is supplied in Tape & Reel (TR), while RC0805FR-071K96L is supplied in Cut Tape (CT) & Digi-Reel®. Selection depends on assembly equipment compatibility and supply chain requirements.

Q: Does the height difference between substitute parts affect PCB design?

A: No. All substitute parts are 0805 (2012 Metric) package variants with height-seated maximum values ranging from 0.020" to 0.028" (0.50mm to 0.70mm). These variations fall within standard 0805 package tolerances and do not require PCB footprint modifications.

Q: Which substitute parts carry automotive AEC-Q200 qualification?

A: ERJ-6ENF1961V, AC0805FR-071K96L, CRCW08051K96FKEA, and RMCF0805FT1K96 are all AEC-Q200 qualified. CR0805-FX-1961ELF and RC0805FR-071K96L do not carry this qualification but remain electrically and mechanically equivalent for non-automotive applications.

Q: What is the significance of anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating (ERJ-S06F1961V) and moisture-resistant features (AC0805FR-071K96L, CR0805-FX-1961ELF, RC0805FR-071K96L) are secondary protective characteristics that do not affect core electrical performance. These features enhance reliability in specific environmental conditions but are not required for basic substitution compatibility.

Q: Can I substitute a non-AEC-Q200 part in an automotive application?

A: Substitution eligibility depends on application requirements and design specifications. If automotive AEC-Q200 qualification is mandated, only AEC-Q200 qualified parts (ERJ-6ENF1961V, AC0805FR-071K96L, CRCW08051K96FKEA, RMCF0805FT1K96) are appropriate. For non-critical automotive or industrial applications, non-qualified alternatives may be acceptable based on design review and risk assessment.