ERJ-S06F1912V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1912V is a 19.1 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The part is currently active in production with 1,062 units in stock.

Equivalent and substitute parts are identified when design requirements allow flexibility in manufacturer selection, feature sets, or power ratings while maintaining core electrical specifications and package compatibility.

Substiute Parts

ERJ-S06F1912V

Panasonic Electronic ComponentsIn Stock: 1137ERJ-S06F1912V Datasheet

Current PartRFQ

ERJ-6ENF1912V

Panasonic Electronic ComponentsIn Stock: 92156ERJ-6ENF1912V Datasheet

SimilarRFQ

CR0805-FX-1912ELF

Bourns Inc.In Stock: 23627CR0805-FX-1912ELF Datasheet

SimilarRFQ

CRCW080519K1FKEA

Vishay DaleIn Stock: 16555CRCW080519K1FKEA Datasheet

SimilarRFQ

CRCW080519K1FKEAHP

Vishay DaleIn Stock: 4607CRCW080519K1FKEAHP Datasheet

SimilarRFQ

RC0805FR-0719K1L

YAGEOIn Stock: 59866RC0805FR-0719K1L Datasheet

SimilarRFQ

RCS080519K1FKEA

Vishay DaleIn Stock: 4339RCS080519K1FKEA Datasheet

SimilarRFQ

RMCF0805FT19K1

Stackpole Electronics IncIn Stock: 52650RMCF0805FT19K1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1912V are grouped based on the following criteria:

Primary Substitution Criteria (Interchangeable):

• Resistance value: 19.1 kOhms
• Tolerance: ±1%
• Package: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL 1 rating

Secondary Substitution Criteria (Application-Dependent):

• Manufacturer selection (Panasonic, Bourns, Vishay Dale, YAGEO, Stackpole)
• Feature variations (anti-sulfur, moisture resistant, pulse withstanding)
• Automotive AEC-Q200 qualification
• Physical height variations (0.020" to 0.028" seated height)

Non-Interchangeable Variants:

• Parts with 0.5W (1/2W) power rating (CRCW080519K1FKEAHP, RCS080519K1FKEA) are suitable only when circuit design permits higher power dissipation capability.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (0.125W, 1/8W Rating):

Parts ERJ-6ENF1912V, CRCW080519K1FKEA, RMCF0805FT19K1, CR0805-FX-1912ELF, and RC0805FR-0719K1L maintain identical electrical specifications and power rating to the ERJ-S06F1912V. Selection among these depends on:

• Automotive qualification requirement: ERJ-6ENF1912V, CRCW080519K1FKEA, and RMCF0805FT19K1 carry AEC-Q200 certification matching the original part.
• Non-automotive applications: CR0805-FX-1912ELF and RC0805FR-0719K1L provide moisture-resistant alternatives without automotive qualification.
• Availability: ERJ-6ENF1912V offers highest stock (92,143 units), followed by RC0805FR-0719K1L (59,778 units).

Higher Power Rating Alternatives (0.5W, 1/2W Rating):

Parts CRCW080519K1FKEAHP and RCS080519K1FKEA feature 0.5W power rating with pulse withstanding capability. These are suitable only when circuit design permits increased power dissipation and does not require the 0.125W specification. Both carry AEC-Q200 certification.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical operating temperature range (-55°C ~ 155°C). Physical height variations (0.50mm to 0.70mm seated height) are within standard PCB assembly tolerances for 0805 packages.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1912V replace ERJ-S06F1912V directly?

A: Yes. Both parts share identical electrical specifications (19.1 kOhms ±1%, 0.125W), package (0805), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 qualification. The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and higher available stock for ERJ-6ENF1912V.

Q: What is the difference between 0.125W and 0.5W rated parts?

A: Power rating indicates maximum continuous power dissipation capability. The 0.125W parts (ERJ-S06F1912V, CRCW080519K1FKEA, RMCF0805FT19K1) are suitable for circuits where resistor power dissipation does not exceed 0.125W. The 0.5W parts (CRCW080519K1FKEAHP, RCS080519K1FKEA) accommodate higher power dissipation and pulse withstanding events. Selection depends on circuit requirements, not interchangeability.

Q: Are moisture-resistant variants (CR0805-FX-1912ELF, RC0805FR-0719K1L) suitable for automotive applications?

A: These parts lack AEC-Q200 certification. They are suitable for non-automotive applications requiring moisture resistance. For automotive designs requiring the original ERJ-S06F1912V specification, use AEC-Q200 qualified alternatives: ERJ-6ENF1912V, CRCW080519K1FKEA, RMCF0805FT19K1, or RCS080519K1FKEA.

Q: Do physical height differences affect PCB assembly?

A: Seated height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts use identical 0805 (2012 Metric) footprint dimensions (2.00mm L × 1.25mm W).

Q: Which substitute offers best availability?

A: RC0805FR-0719K1L (YAGEO) provides highest stock at 59,778 units, followed by ERJ-6ENF1912V (Panasonic) at 92,143 units. For automotive-qualified alternatives, ERJ-6ENF1912V offers superior availability.

Q: Can I use these parts interchangeably in production?

A: Parts with identical specifications (19.1 kOhms ±1%, 0.125W, 0805 package, ±100ppm/°C, -55°C ~ 155°C) are electrically interchangeable. Automotive applications must use AEC-Q200 qualified parts. Verify design documentation for any specific manufacturer or feature requirements before substitution.