ERJ-S06F1870V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1870V is a 187 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is active and widely available. Substitute parts are identified based on matching electrical specifications, mechanical compatibility, and compliance certifications to ensure direct functional equivalence in circuit applications.

Substiute Parts

ERJ-S06F1870V

Panasonic Electronic ComponentsIn Stock: 758ERJ-S06F1870V Datasheet

Current PartRFQ

ERJ-6ENF1870V

Panasonic Electronic ComponentsIn Stock: 84172ERJ-6ENF1870V Datasheet

SimilarRFQ

CRCW0805187RFKEA

Vishay DaleIn Stock: 20312CRCW0805187RFKEA Datasheet

SimilarRFQ

RC0805FR-07187RL

YAGEOIn Stock: 20564RC0805FR-07187RL Datasheet

SimilarRFQ

RMCF0805FT187R

Stackpole Electronics IncIn Stock: 22453RMCF0805FT187R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1870V are qualified based on the following criteria:

• Resistance value: 187 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• RoHS3 compliance
• Moisture Sensitivity Level 1

All identified substitute parts meet these electrical and mechanical parameters. Variations in height (seated maximum) and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional equivalence in standard circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and Moisture Sensitivity Level 1. Selection among these equivalents depends on application-specific requirements:

For automotive applications requiring AEC-Q200 qualification, ERJ-6ENF1870V, CRCW0805187RFKEA, and RMCF0805FT187R are suitable alternatives to the ERJ-S06F1870V.

For applications in corrosive environments where anti-sulfur protection is critical, the ERJ-S06F1870V remains the primary choice. The ERJ-6ENF1870V from the same manufacturer provides equivalent performance without the anti-sulfur feature.

For applications prioritizing compact height profile, CRCW0805187RFKEA offers the lowest seated height at 0.50mm while maintaining all electrical specifications.

For moisture-sensitive applications, RC0805FR-07187RL provides moisture-resistant construction as an alternative to AEC-Q200 rated parts.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1870V directly replace ERJ-S06F1870V?

A: Yes. Both parts share identical electrical specifications (187Ω ±1%, 0.125W, ±100ppm/°C), package (0805), and operating temperature range (-55°C to 155°C). The primary difference is the absence of anti-sulfur coating on the ERJ-6ENF1870V. For applications not requiring anti-sulfur protection, this substitution is valid.

Q: Are all substitute parts suitable for automotive applications?

A: ERJ-6ENF1870V, CRCW0805187RFKEA, and RMCF0805FT187R carry AEC-Q200 automotive qualification. RC0805FR-07187RL does not list AEC-Q200 rating and is suitable for non-automotive applications or where automotive qualification is not required.

Q: Does the height difference between substitute parts affect PCB assembly?

A: Height variations (0.50mm to 0.70mm seated maximum) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are suitable for standard pick-and-place equipment and reflow soldering processes.

Q: What is the significance of Moisture Sensitivity Level 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts have MSL 1 rating, eliminating moisture-related handling constraints during storage and assembly.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. All substitute parts meet the core electrical and mechanical parameters of the ERJ-S06F1870V. Direct substitution is valid provided the application does not specifically require anti-sulfur coating or other feature-specific characteristics of the original part.