Equivalent & Substitute Parts for ERJ-S06F1802V

Part Overview

The Panasonic ERJ-S06F1802V is an 18 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package with anti-sulfur coating and automotive AEC-Q200 qualification. The part is active and in production with 783 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when application requirements necessitate alternative electrical or mechanical characteristics.

Substiute Parts

ERJ-S06F1802V

Panasonic Electronic ComponentsIn Stock: 892ERJ-S06F1802V Datasheet

Current PartRFQ

ERJ-UP6F1802V

Panasonic Electronic ComponentsIn Stock: 5692ERJ-UP6F1802V Datasheet

UpgradeRFQ

ERJ-6ENF1802V

Panasonic Electronic ComponentsIn Stock: 142467ERJ-6ENF1802V Datasheet

SimilarRFQ

CRG0805F18K

TE Connectivity Passive ProductIn Stock: 20297CRG0805F18K Datasheet

DirectRFQ

AC0805FR-0718KL

YAGEOIn Stock: 7911AC0805FR-0718KL Datasheet

SimilarRFQ

CR0805-FX-1802ELF

Bourns Inc.In Stock: 37301CR0805-FX-1802ELF Datasheet

SimilarRFQ

CRCW080518K0FKEA

Vishay DaleIn Stock: 37942CRCW080518K0FKEA Datasheet

SimilarRFQ

CRCW080518K0FKEAHP

Vishay DaleIn Stock: 14831CRCW080518K0FKEAHP Datasheet

SimilarRFQ

RC0805FR-0718KL

YAGEOIn Stock: 156516RC0805FR-0718KL Datasheet

SimilarRFQ

RCS080518K0FKEA

Vishay DaleIn Stock: 5901RCS080518K0FKEA Datasheet

SimilarRFQ

RMCF0805FT18K0

Stackpole Electronics IncIn Stock: 93529RMCF0805FT18K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1802V are classified into two categories based on allowed parameter variations:

Direct Equivalents (Identical Electrical & Mechanical Specifications) Parts that match all critical parameters: 18 kOhms resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and ROHS3 compliance. These parts differ only in packaging format (Tape & Reel vs. Cut Tape) or minor physical dimensions (height variation within acceptable limits). Direct equivalents include ERJ-6ENF1802V, CRG0805F18K, AC0805FR-0718KL, CR0805-FX-1802ELF, CRCW080518K0FKEA, RC0805FR-0718KL, and RMCF0805FT18K0.

Upgraded Substitutes (Higher Power Rating) Parts that maintain all electrical specifications (18 kOhms, ±1% tolerance, ±100ppm/°C, -55°C to 155°C) but feature increased power dissipation capability (0.5W / 1/2W instead of 0.125W). These include ERJ-UP6F1802V, CRCW080518K0FKEAHP, and RCS080518K0FKEA. Upgraded substitutes are suitable for applications requiring higher power handling while maintaining identical resistance and tolerance characteristics.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Power Rating) ERJ-6ENF1802V, CRCW080518K0FKEA, RMCF0805FT18K0, and AC0805FR-0718KL are direct electrical and mechanical equivalents to ERJ-S06F1802V. All maintain 0.125W power rating, 18 kOhms resistance, ±1% tolerance, and 0805 package dimensions. ERJ-6ENF1802V and RMCF0805FT18K0 are Panasonic and Stackpole alternatives respectively, both AEC-Q200 qualified. CRCW080518K0FKEA (Vishay Dale) and AC0805FR-0718KL (YAGEO) are also AEC-Q200 qualified. All substitute parts are ROHS3 compliant and MSL 1 rated.

For Automotive Applications When AEC-Q200 qualification is required, select from: ERJ-UP6F1802V, ERJ-6ENF1802V, AC0805FR-0718KL, CRCW080518K0FKEA, CRCW080518K0FKEAHP, RCS080518K0FKEA, or RMCF0805FT18K0. These parts carry explicit automotive qualification and are suitable for automotive-grade circuit designs.

For Higher Power Dissipation When application requirements exceed 0.125W but maintain 18 kOhms resistance and ±1% tolerance, select upgraded substitutes: ERJ-UP6F1802V, CRCW080518K0FKEAHP, or RCS080518K0FKEA. All three are rated 0.5W (1/2W) with pulse withstanding capability and AEC-Q200 qualification. These parts occupy the same 0805 package footprint as the primary part.

For Non-Automotive Applications CRG0805F18K (TE Connectivity) and CR0805-FX-1802ELF (Bourns Inc.) are suitable direct equivalents when AEC-Q200 qualification is not required. Both maintain identical electrical specifications and 0805 package compatibility.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1802V replace ERJ-S06F1802V in automotive applications? A: Yes. ERJ-6ENF1802V is a direct equivalent with identical resistance (18 kOhms), tolerance (±1%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 qualification. The primary difference is packaging format: ERJ-6ENF1802V is supplied in Cut Tape & Digi-Reel format versus Tape & Reel for ERJ-S06F1802V.

Q: What is the difference between direct equivalents and upgraded substitutes? A: Direct equivalents (ERJ-6ENF1802V, CRCW080518K0FKEA, RMCF0805FT18K0, etc.) maintain the 0.125W power rating and all other electrical specifications. Upgraded substitutes (ERJ-UP6F1802V, CRCW080518K0FKEAHP, RCS080518K0FKEA) increase power rating to 0.5W while preserving resistance, tolerance, and temperature characteristics. Upgraded substitutes are suitable only when higher power dissipation is acceptable or required.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the primary part ERJ-S06F1802V.

Q: Does packaging format affect electrical performance? A: No. Packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) affects only procurement and handling logistics, not electrical or thermal performance. All parts with identical electrical specifications perform identically in circuit applications.

Q: Which substitute parts are suitable for automotive designs? A: Parts with AEC-Q200 qualification are suitable for automotive applications: ERJ-UP6F1802V, ERJ-6ENF1802V, AC0805FR-0718KL, CRCW080518K0FKEA, CRCW080518K0FKEAHP, RCS080518K0FKEA, and RMCF0805FT18K0. Non-automotive qualified alternatives (CRG0805F18K, CR0805-FX-1802ELF, RC0805FR-0718KL) are not recommended for automotive circuit designs.

Q: Can I use a 0.5W substitute in place of a 0.125W part? A: Yes. A higher power-rated component (0.5W) can replace a lower power-rated part (0.125W) without electrical or thermal issues. The circuit will operate within the substitute's power dissipation capability. However, physical height may vary slightly; verify PCB clearance if space constraints exist.

Q: What is the significance of MSL 1 rating? A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture baking requirements. All listed parts carry MSL 1 rating, eliminating moisture-related handling constraints during storage and assembly.