ERJ-S06F17R4V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F17R4V is a 17.4 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently active in production with 1104 units in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F17R4V

Panasonic Electronic ComponentsIn Stock: 1140ERJ-S06F17R4V Datasheet

Current PartRFQ

ERJ-6ENF17R4V

Panasonic Electronic ComponentsIn Stock: 109471ERJ-6ENF17R4V Datasheet

SimilarRFQ

RC0805FR-0717R4L

YAGEOIn Stock: 127801RC0805FR-0717R4L Datasheet

SimilarRFQ

RMCF0805FT17R4

Stackpole Electronics IncIn Stock: 1993RMCF0805FT17R4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F17R4V are qualified based on the following critical parameters:

• Resistance Value: 17.4 Ohms (exact match required)
• Tolerance: ±1% (ensures circuit performance specifications)
• Power Rating: 0.125W / 1/8W (thermal and electrical capability)
• Package: 0805 (2012 Metric) (PCB footprint compatibility)
• Composition: Thick Film (material consistency)
• Temperature Coefficient: ±100ppm/°C (temperature stability)
• Operating Temperature: -55°C ~ 155°C (environmental range)
• Compliance: ROHS3 Compliant, MSL 1 (regulatory and handling requirements)

All identified substitutes meet these core parameters. Variations in features (such as anti-sulfur coating or specific automotive ratings) and physical dimensions (height) do not affect functional interchangeability in standard circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All four parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming regulatory alignment and handling compatibility. Selection among these substitutes should be based on:

ERJ-6ENF17R4V (Panasonic): Highest inventory availability (109,389 units). Maintains Panasonic manufacturing consistency with automotive AEC-Q200 qualification. Suitable for applications where supply continuity and automotive-grade reliability are priorities.

RC0805FR-0717R4L (YAGEO): Highest inventory availability (127,703 units). Features moisture-resistant construction. Suitable for general industrial and consumer applications where moisture resistance is beneficial and automotive qualification is not required.

RMCF0805FT17R4 (Stackpole Electronics): Automotive AEC-Q200 qualified. Suitable for automotive applications requiring third-party manufacturer qualification. Lower inventory (1,914 units) compared to other options.

All parts are electrically and mechanically interchangeable within the specified parameters. Selection should prioritize supply availability, manufacturing source preference, and application-specific environmental requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF17R4V replace ERJ-S06F17R4V directly? A: Yes. Both parts share identical electrical specifications (17.4 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), package (0805), composition (thick film), and compliance ratings (ROHS3, MSL 1). The primary difference is the series designation (ERJ-6EN vs. ERJ-S06) and the absence of anti-sulfur coating in the ERJ-6ENF17R4V. For standard applications, this substitution is direct.

Q: Is RC0805FR-0717R4L suitable for automotive applications? A: RC0805FR-0717R4L meets all core electrical and mechanical requirements for automotive circuits. However, it lacks AEC-Q200 automotive qualification. If AEC-Q200 certification is a design requirement, use ERJ-6ENF17R4V or RMCF0805FT17R4 instead.

Q: What is the significance of anti-sulfur coating in ERJ-S06F17R4V? A: Anti-sulfur coating protects the resistor from sulfur-containing environmental contaminants, extending reliability in harsh industrial and automotive environments. Substitutes without this feature (ERJ-6ENF17R4V, RC0805FR-0717R4L, RMCF0805FT17R4) are suitable for standard operating conditions but may have reduced longevity in high-sulfur environments.

Q: Are there physical dimension differences between these parts? A: All parts conform to 0805 (2012 Metric) package specifications with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height variations are minor (0.024" to 0.028" / 0.60mm to 0.70mm) and do not affect PCB assembly compatibility.

Q: Which substitute offers the best supply availability? A: RC0805FR-0717R4L has the highest inventory (127,703 units), followed by ERJ-6ENF17R4V (109,389 units). Both provide excellent supply continuity for high-volume production.

Q: Can these parts be used interchangeably in the same PCB design? A: Yes. All four parts are mechanically and electrically interchangeable within the same 0805 footprint. No PCB redesign or revalidation is required for substitution among these parts.