Equivalent & Substitute Parts for ERJ-S06F1623V

Part Overview

The ERJ-S06F1623V is a 162 kOhms ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in temperature-extreme environments (-55°C to 155°C). The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are necessary when the primary part faces supply constraints, extended lead times, or when design flexibility permits component sourcing from multiple qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F1623V

Panasonic Electronic ComponentsIn Stock: 1051ERJ-S06F1623V Datasheet

Current PartRFQ

ERJ-6ENF1623V

Panasonic Electronic ComponentsIn Stock: 85145ERJ-6ENF1623V Datasheet

SimilarRFQ

CRCW0805162KFKEA

Vishay DaleIn Stock: 10028CRCW0805162KFKEA Datasheet

SimilarRFQ

RC0805FR-07162KL

YAGEOIn Stock: 76379RC0805FR-07162KL Datasheet

SimilarRFQ

RMCF0805FT162K

Stackpole Electronics IncIn Stock: 171034RMCF0805FT162K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1623V is determined by strict equivalence across the following critical parameters:

• Resistance Value: 162 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match required)
• Termination Count: 2 (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity: MSL 1 (exact match required)

All four substitute parts listed below meet these criteria. Variations in packaging format (Tape & Reel versus Cut Tape & Digi-Reel) and minor differences in seated height do not affect electrical or mechanical compatibility in standard PCB assembly processes.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are functionally equivalent to the ERJ-S06F1623V and are suitable for direct replacement in applications requiring 162 kOhms ±1% 0.125W 0805 thick film resistors.

ERJ-6ENF1623V (Panasonic): Same manufacturer as the primary part. Differs from ERJ-S06F1623V in series designation (ERJ-6EN versus ERJ-S06) and lacks anti-sulfur coating specification, though retains AEC-Q200 automotive qualification. Highest inventory availability (85,106 pcs). Recommended for applications where anti-sulfur coating is not a design requirement.

CRCW0805162KFKEA (Vishay Dale): Meets all electrical and mechanical specifications. Packaged in Cut Tape & Digi-Reel format. Seated height of 0.020" (0.50mm) is the lowest among all options, suitable for space-constrained PCB layouts. AEC-Q200 qualified. Inventory: 9,983 pcs.

RC0805FR-07162KL (YAGEO): Meets all electrical specifications. Features moisture-resistant coating rather than automotive AEC-Q200 qualification. Suitable for non-automotive applications or where moisture resistance is the primary environmental concern. Highest inventory availability (76,347 pcs). Packaged in Cut Tape & Digi-Reel format.

RMCF0805FT162K (Stackpole Electronics): Meets all electrical and mechanical specifications with AEC-Q200 automotive qualification. Packaged in Tape & Reel format matching the primary part. Seated height of 0.026" (0.65mm). Highest inventory availability among automotive-qualified alternatives (170,932 pcs).

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1623V replace ERJ-S06F1623V in automotive applications?

A: ERJ-6ENF1623V is AEC-Q200 qualified and electrically equivalent. The primary difference is the absence of anti-sulfur coating specification in ERJ-6ENF1623V. If anti-sulfur coating is a design requirement for your application, this substitution is not recommended. If anti-sulfur coating is not specified in your design documentation, ERJ-6ENF1623V is a direct replacement.

Q: What is the significance of seated height differences among the substitute parts?

A: Seated height variations (0.020" to 0.028") reflect manufacturing tolerances and design differences between manufacturers. These differences do not affect electrical performance or standard PCB assembly compatibility. Height differences become relevant only in applications with strict vertical clearance constraints or specialized assembly requirements.

Q: Is RC0805FR-07162KL suitable for automotive applications?

A: RC0805FR-07162KL is not AEC-Q200 qualified. It features moisture-resistant coating instead. This part is suitable for industrial and consumer applications where moisture resistance is required but automotive qualification is not. For automotive applications, select ERJ-S06F1623V, ERJ-6ENF1623V, CRCW0805162KFKEA, or RMCF0805FT162K.

Q: Do packaging format differences (Tape & Reel versus Cut Tape & Digi-Reel) affect compatibility?

A: No. Packaging format differences do not affect electrical or mechanical compatibility. The choice between Tape & Reel and Cut Tape & Digi-Reel is determined by your assembly process and equipment capabilities, not by circuit design requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts, including the primary ERJ-S06F1623V, are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing.

Q: Which substitute part offers the best inventory availability?

A: RMCF0805FT162K (Stackpole Electronics) offers the highest inventory availability at 170,932 pcs, followed by RC0805FR-07162KL (YAGEO) at 76,347 pcs. ERJ-6ENF1623V (Panasonic) provides 85,106 pcs. CRCW0805162KFKEA (Vishay Dale) has the lowest availability at 9,983 pcs.