ERJ-S06F1620V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1620V is a 162 Ohm ±1% 1/8W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliability in harsh automotive environments. The part is currently active in production with 1015 units in stock.

Substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits equivalent performance specifications. All substitute parts listed maintain identical electrical characteristics and mechanical compatibility with the main part number.

Key Parameters

Parameter	Value
Resistance	162 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1620V are qualified based on the following electrical and mechanical parameters:

Resistance value: 162 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W) or higher
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C minimum
RoHS3 compliance
MSL rating: 1 (Unlimited)

Substitute parts are grouped into two categories: direct equivalents (identical power rating of 0.125W) and higher-rated alternatives (0.5W power rating). All parts maintain the same footprint, resistance value, tolerance, and temperature characteristics. Differences in physical height and specific feature sets (anti-sulfur vs. moisture resistant vs. pulse withstanding) do not affect electrical substitutability.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	Features	RoHS	Inventory
ERJ-S06F1620V	Panasonic	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.70mm	Anti-Sulfur, AEC-Q200	ROHS3	1015
ERJ-6ENF1620V	Panasonic	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.70mm	AEC-Q200	ROHS3	226871
CR0805-FX-1620ELF	Bourns Inc.	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	Moisture Resistant	ROHS3	20754
CRCW0805162RFKEA	Vishay Dale	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.50mm	AEC-Q200	ROHS3	35701
CRCW0805162RFKEAHP	Vishay Dale	162 Ω	±1%	0.5	0805	±100ppm/°C	-55~155°C	0.50mm	AEC-Q200, Pulse Withstanding	ROHS3	7862
RC0805FR-07162RL	YAGEO	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	Moisture Resistant	ROHS3	139008
RMCF0805FT162R	Stackpole Electronics Inc	162 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.65mm	AEC-Q200	ROHS3	14181

Engineering Selection Recommendations

All substitute parts listed are active production components with ROHS3 compliance and MSL rating of 1 (Unlimited). Selection among equivalents should be based on:

Direct Equivalents (0.125W, 1/8W): ERJ-6ENF1620V, CR0805-FX-1620ELF, CRCW0805162RFKEA, RC0805FR-07162RL, and RMCF0805FT162R are electrically and mechanically interchangeable with the main part. These maintain identical power ratings and operating specifications. ERJ-6ENF1620V offers the highest inventory availability (226,871 units) and is also manufactured by Panasonic. RC0805FR-07162RL provides the second-highest availability (139,008 units).

Higher Power Rating Alternative (0.5W, 1/2W): CRCW0805162RFKEAHP provides increased power handling capability while maintaining the same footprint and electrical characteristics. This part is suitable for applications where thermal margin or pulse withstanding capability is required.

Automotive Applications: Parts with AEC-Q200 qualification (ERJ-S06F1620V, ERJ-6ENF1620V, CRCW0805162RFKEA, CRCW0805162RFKEAHP, RMCF0805FT162R) are appropriate for automotive and harsh environment applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-6ENF1620V for ERJ-S06F1620V? A: Yes. Both parts share identical electrical specifications (162 Ω, ±1%, 0.125W, ±100ppm/°C, -55~155°C), package (0805), and compliance ratings (ROHS3, MSL 1). The primary difference is the absence of anti-sulfur coating on ERJ-6ENF1620V. Both are manufactured by Panasonic and are electrically equivalent.

Q: What is the difference between moisture-resistant and anti-sulfur coatings? A: Moisture-resistant coatings (CR0805-FX-1620ELF, RC0805FR-07162RL) protect against humidity and moisture ingress. Anti-sulfur coatings (ERJ-S06F1620V) protect against sulfur-containing atmospheric contaminants. Both are protective measures; the choice depends on the specific environmental exposure of the application.

Q: Can I use CRCW0805162RFKEAHP (0.5W) instead of ERJ-S06F1620V (0.125W)? A: Yes. The 0.5W part is a direct substitute with higher power handling capability. It maintains identical resistance, tolerance, temperature coefficient, and operating range. The increased power rating provides additional thermal margin and is suitable for applications where the original 0.125W rating may be marginal.

Q: Are all substitute parts available in the same packaging? A: Most substitute parts are available in Tape & Reel (TR) packaging. RC0805FR-07162RL is available in Cut Tape (CT) & Digi-Reel® packaging. Verify packaging requirements with your procurement specification before selection.

Q: Do physical height differences affect PCB assembly compatibility? A: Physical height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are suitable for standard pick-and-place equipment and reflow soldering processes.

Q: Which substitute part has the highest inventory availability? A: RC0805FR-07162RL (YAGEO) has the highest inventory with 139,008 units in stock, followed by ERJ-6ENF1620V (Panasonic) with 226,871 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message