ERJ-S06F1502V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1502V is a 15 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliable performance across -55°C to 155°C operating temperature range. The part is active and in production. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design optimization across multiple manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	15 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1502V are classified based on strict electrical and mechanical parameter alignment:

Direct Equivalents maintain identical specifications: 15 kOhms resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. These parts differ only in manufacturer, series designation, or packaging format (Tape & Reel versus Cut Tape).

Upgrade Substitutes increase power rating from 0.125W to 0.5W while maintaining all other electrical parameters. These parts provide enhanced thermal capability and pulse withstanding performance within the same 0805 package footprint.

Enhanced Substitutes increase power rating to 0.4W (2/5W) while maintaining core electrical specifications. These parts offer intermediate power capability with pulse withstanding features.

The following parameters determine substitution eligibility:

Resistance value: 15 kOhms (fixed)
Tolerance: ±1% (fixed)
Package: 0805 (2012 Metric) (fixed)
Temperature coefficient: ±100ppm/°C (fixed)
Operating temperature: -55°C ~ 155°C (fixed)
Power rating: 0.125W minimum (upgradeable)
Composition: Thick Film (fixed)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp (°C)	Features	RoHS	Packaging Type
ERJ-S06F1502V	Panasonic	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Anti-Sulfur, AEC-Q200	ROHS3	Tape & Reel
ERJ-UP6F1502V	Panasonic	15k	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	Anti-Sulfur, AEC-Q200, Pulse Withstanding	ROHS3	Tape & Reel
ERJ-6ENF1502V	Panasonic	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	AEC-Q200	ROHS3	Cut Tape & Digi-Reel
CRG0805F15K	TE Connectivity	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	None specified	ROHS3	Tape & Reel
AC0805FR-0715KL	YAGEO	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	AEC-Q200, Moisture Resistant	ROHS3	Tape & Reel
AF0805FR-0715KL	YAGEO	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Anti-Sulfur, AEC-Q200	ROHS3	Tape & Reel
CR0805-FX-1502ELF	Bourns Inc.	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Moisture Resistant	ROHS3	Tape & Reel
CRCW080515K0FKEA	Vishay Dale	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	AEC-Q200	ROHS3	Cut Tape & Digi-Reel
CRCW080515K0FKEAHP	Vishay Dale	15k	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	AEC-Q200, Pulse Withstanding	ROHS3	Tape & Reel
CRCW080515K0FKTA	Vishay Dale	15k	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	AEC-Q200	RoHS non-compliant	Tape & Reel
ESR10EZPF1502	Rohm Semiconductor	15k	±1%	0.4	0805	±100ppm/°C	-55 ~ 155	AEC-Q200, Pulse Withstanding	ROHS3	Tape & Reel

Engineering Selection Recommendations

Direct Equivalent Selection: Parts ERJ-6ENF1502V, CRG0805F15K, AC0805FR-0715KL, AF0805FR-0715KL, CR0805-FX-1502ELF, and CRCW080515K0FKEA provide direct electrical and mechanical equivalence to ERJ-S06F1502V. All maintain 15 kOhms ±1%, 0.125W power rating, 0805 package, and -55°C to 155°C operating range. Selection among these depends on packaging preference (Tape & Reel versus Cut Tape) and feature requirements. Parts with AEC-Q200 certification (CRG0805F15K, AC0805FR-0715KL, AF0805FR-0715KL, CRCW080515K0FKEA) are suitable for automotive applications. AF0805FR-0715KL matches the anti-sulfur feature of the main part.

Upgrade Selection: ERJ-UP6F1502V and CRCW080515K0FKEAHP increase power rating to 0.5W while maintaining all other specifications. These upgrades are suitable when thermal margin or pulse withstanding capability is required without changing circuit board layout or footprint.

Enhanced Power Selection: ESR10EZPF1502 provides 0.4W power rating with pulse withstanding capability, offering intermediate thermal performance between standard and full upgrade options.

Compliance Consideration: CRCW080515K0FKTA is RoHS non-compliant and REACH affected; use only when legacy design requirements mandate this part. All other substitutes maintain ROHS3 compliance and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1502V replace ERJ-S06F1502V directly? A: Yes. Both parts share identical electrical specifications (15 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C) and 0805 package. The difference is packaging format: ERJ-6ENF1502V uses Cut Tape & Digi-Reel while ERJ-S06F1502V uses Tape & Reel. Electrical performance and PCB footprint are identical.

Q: What is the difference between ERJ-S06F1502V and ERJ-UP6F1502V? A: Power rating increases from 0.125W to 0.5W. All other parameters remain identical. ERJ-UP6F1502V provides enhanced thermal capability and pulse withstanding performance. Both fit the same 0805 footprint. Use ERJ-UP6F1502V when higher power dissipation or pulse stress is anticipated.

Q: Are all substitute parts AEC-Q200 qualified? A: No. CRG0805F15K, CR0805-FX-1502ELF, and ESR10EZPF1502 do not list AEC-Q200 in their specifications. Parts with explicit AEC-Q200 certification are ERJ-S06F1502V, ERJ-UP6F1502V, AC0805FR-0715KL, AF0805FR-0715KL, CRCW080515K0FKEA, CRCW080515K0FKEAHP, and ESR10EZPF1502. For automotive applications, select AEC-Q200 qualified parts.

Q: Can I use a higher power rated part as a substitute? A: Yes. Parts rated 0.4W or 0.5W are direct substitutes for 0.125W applications. Higher power rating provides additional thermal margin and does not degrade circuit performance. All substitute parts maintain identical resistance, tolerance, temperature coefficient, and operating temperature range.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Both are surface mount packaging formats suitable for automated assembly. Tape & Reel is continuous reel format for high-volume production. Cut Tape & Digi-Reel is pre-cut tape format for lower-volume or mixed-component assembly. Electrical and mechanical specifications are identical; selection depends on assembly equipment and volume requirements.

Q: Is CRCW080515K0FKTA suitable for new designs? A: No. CRCW080515K0FKTA is RoHS non-compliant and REACH affected. Use only for legacy design maintenance or when existing design constraints mandate this specific part. For new designs, select ROHS3 compliant alternatives.

Q: Do all parts have MSL 1 (Unlimited) moisture sensitivity? A: Yes. All listed parts, including the main part ERJ-S06F1502V, have Moisture Sensitivity Level 1, indicating unlimited shelf life and no special moisture control requirements during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message