Equivalent & Substitute Parts for ERJ-S06F1500V

Part Overview

The ERJ-S06F1500V is a 150 Ohm ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliable performance across -55°C to 155°C operating temperature range. The part is currently active in production with 1125 units in stock.

Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, support different packaging requirements, or enable performance upgrades when circuit design permits.

Key Parameters

Parameter	Value
Resistance	150 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts are classified based on the following substitution criteria:

Upgrade Category: Parts with identical electrical specifications (150 Ohms ±1%, 0805 package, ±100ppm/°C, -55°C to 155°C) but higher power rating (0.5W instead of 0.125W). These provide enhanced thermal margin and pulse withstanding capability while maintaining full backward compatibility.

Direct Equivalent Category: Parts with identical electrical and mechanical specifications (150 Ohms ±1%, 0.125W, 0805 package, ±100ppm/°C, -55°C to 155°C) from different manufacturers. These are pin-for-pin and functionally equivalent replacements.

Similar Category: Parts matching core electrical parameters (150 Ohms ±1%, 0.125W, 0805 package, ±100ppm/°C, -55°C to 155°C) with variations in packaging format (Cut Tape vs. Tape & Reel), height profile, or feature set (presence/absence of automotive rating or moisture resistance). These require verification of packaging compatibility with assembly equipment.

Key Parameters Determining Substitutability:

Resistance value: 150 Ohms (mandatory match)
Tolerance: ±1% (mandatory match)
Package: 0805 (2012 Metric) (mandatory match)
Temperature coefficient: ±100ppm/°C (mandatory match)
Operating temperature: -55°C to 155°C (mandatory match)
Power rating: 0.125W minimum (upgrades to 0.5W permitted)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	Height Max (mm)	Packaging
ERJ-S06F1500V	Panasonic	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Yes	0.70	Tape & Reel
ERJ-UP6F1500V	Panasonic	150 Ω	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	Yes	0.70	Tape & Reel
ERJ-6ENF1500V	Panasonic	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Yes	0.70	Cut Tape & Digi-Reel
CRG0805F150R	TE Connectivity	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	No	0.65	Tape & Reel
AC0805FR-07150RL	YAGEO	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Yes	0.60	Cut Tape & Digi-Reel
CR0805-FX-1500ELF	Bourns Inc.	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	No	0.60	Tape & Reel
CRCW0805150RFKEA	Vishay Dale	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Yes	0.50	Tape & Reel
CRCW0805150RFKEAHP	Vishay Dale	150 Ω	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	Yes	0.60	Cut Tape & Digi-Reel
CRCW0805150RFKTA	Vishay Dale	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	Yes	0.50	Cut Tape & Digi-Reel
RC0805FR-07150RL	YAGEO	150 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155	No	0.60	Cut Tape & Digi-Reel
RCS0805150RFKEA	Vishay Dale	150 Ω	±1%	0.5	0805	±100ppm/°C	-55 ~ 155	Yes	0.50	Tape & Reel

Engineering Selection Recommendations

For Direct Replacement (Same Power Rating): ERJ-6ENF1500V (Panasonic) is a direct functional equivalent with identical electrical specifications and AEC-Q200 qualification. The primary difference is packaging format (Cut Tape & Digi-Reel vs. Tape & Reel), which requires verification of compatibility with assembly equipment. This part maintains all automotive and anti-sulfur specifications of the original.

CRCW0805150RFKEA (Vishay Dale) and CRCW0805150RFKTA (Vishay Dale) are functionally equivalent with AEC-Q200 qualification and identical electrical parameters. Both feature reduced height profiles (0.50mm vs. 0.70mm), which may provide board layout advantages. CRCW0805150RFKTA uses Cut Tape & Digi-Reel packaging.

CRG0805F150R (TE Connectivity) and CR0805-FX-1500ELF (Bourns Inc.) provide direct electrical equivalence but lack AEC-Q200 automotive qualification. These are suitable for non-automotive applications requiring identical electrical performance.

AC0805FR-07150RL (YAGEO) and RC0805FR-07150RL (YAGEO) are functionally equivalent with moisture-resistant thick film composition. AC0805FR-07150RL includes AEC-Q200 qualification; RC0805FR-07150RL does not. Both use Cut Tape & Digi-Reel packaging.

For Performance Upgrade (Higher Power Rating): ERJ-UP6F1500V (Panasonic), CRCW0805150RFKEAHP (Vishay Dale), and RCS0805150RFKEA (Vishay Dale) provide 0.5W (1/2W) power rating with identical resistance, tolerance, and temperature specifications. These upgrades maintain AEC-Q200 qualification and pulse withstanding capability. Selection depends on packaging requirements and inventory availability.

Compliance Considerations: All listed parts are ROHS3 compliant except CRCW0805150RFKTA, which is RoHS non-compliant. CRCW0805150RFKTA is also REACH Affected, whereas all other parts are REACH Unaffected or Vendor Undefined. For applications requiring full compliance, exclude CRCW0805150RFKTA.

Frequently Asked Questions (FAQ)

Q: Can ERJ-UP6F1500V be used as a direct replacement for ERJ-S06F1500V?

A: Yes, ERJ-UP6F1500V is electrically and mechanically compatible. It provides identical resistance (150 Ohms ±1%), tolerance, temperature coefficient, and operating range. The primary difference is higher power rating (0.5W vs. 0.125W), which provides additional thermal margin and pulse withstanding capability. This is a backward-compatible upgrade suitable for any application using the original part.

Q: What is the significance of packaging format differences (Tape & Reel vs. Cut Tape & Digi-Reel)?

A: Packaging format affects assembly equipment compatibility and handling. Tape & Reel format is standard for automated pick-and-place machines with reel feeders. Cut Tape & Digi-Reel format is suitable for lower-volume production or manual assembly. Verify your assembly equipment specifications before selecting a substitute with different packaging.

Q: Are parts without AEC-Q200 qualification suitable for automotive applications?

A: Parts lacking AEC-Q200 qualification (CRG0805F150R, CR0805-FX-1500ELF, RC0805FR-07150RL) do not meet automotive reliability standards. Use these only in non-automotive applications. For automotive designs, select from parts with AEC-Q200 rating: ERJ-S06F1500V, ERJ-UP6F1500V, ERJ-6ENF1500V, AC0805FR-07150RL, CRCW0805150RFKEA, CRCW0805150RFKEAHP, CRCW0805150RFKTA, or RCS0805150RFKEA.

Q: What is the impact of height profile differences on PCB design?

A: Height variations range from 0.50mm to 0.70mm. Reduced height profiles (0.50mm) may provide advantages in space-constrained designs or applications with height restrictions. Verify clearance requirements with your PCB layout and enclosure design before selecting parts with different height specifications.

Q: Can I substitute a 0.5W rated part for a 0.125W rated part in the same circuit?

A: Yes, upgrading to higher power rating (0.5W) is electrically safe and provides additional thermal margin. The part will operate at lower temperature rise under the same current conditions. This substitution is suitable for any application where the original 0.125W part was specified, provided physical dimensions and packaging are compatible.

Q: What compliance certifications should I verify before selecting a substitute?

A: Verify RoHS compliance status (ROHS3 Compliant required for most applications) and REACH status (REACH Unaffected preferred). CRCW0805150RFKTA is RoHS non-compliant and REACH Affected; exclude this part if compliance is required. All other listed parts meet ROHS3 compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message