ERJ-S06F14R7V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F14R7V is a 14.7 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur coating and operates across -55°C to 155°C. The part is active in production with 1112 units currently in stock. Equivalent and substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across alternative manufacturers.

Key Parameters

Parameter	Value
Resistance	14.7 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F14R7V are qualified based on the following criteria:

Identical resistance value: 14.7 Ohms
Identical tolerance: ±1%
Identical power rating: 0.125W (1/8W)
Identical package: 0805 (2012 Metric)
Identical composition: Thick Film
Identical temperature coefficient: ±100ppm/°C
Identical operating temperature range: -55°C to 155°C
Identical RoHS compliance: ROHS3 Compliant
Identical MSL rating: 1 (Unlimited)

All substitute parts meet these core electrical and mechanical parameters. Variations in physical height and specific feature sets (such as anti-sulfur coating versus moisture resistance) do not affect functional interchangeability in circuit applications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	Features	Status
ERJ-S06F14R7V	Panasonic	14.7 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.70mm	Anti-Sulfur, AEC-Q200	Active
ERJ-6ENF14R7V	Panasonic	14.7 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.70mm	AEC-Q200	Active
CRCW080514R7FKEA	Vishay Dale	14.7 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.50mm	AEC-Q200	Active
RC0805FR-0714R7L	YAGEO	14.7 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60mm	Moisture Resistant	Active
RMCF0805FT14R7	Stackpole Electronics	14.7 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65mm	AEC-Q200	Active

Engineering Selection Recommendations

All listed substitute parts maintain active production status and full ROHS3 compliance. Selection among these equivalents depends on specific application requirements:

For automotive applications requiring AEC-Q200 certification, ERJ-6ENF14R7V, CRCW080514R7FKEA, and RMCF0805FT14R7 are directly qualified. The ERJ-S06F14R7V provides additional anti-sulfur protection; equivalent protection is not explicitly stated for all substitutes.

For applications with height constraints, CRCW080514R7FKEA offers the lowest seated height at 0.50mm maximum. RC0805FR-0714R7L provides moisture-resistant construction as an alternative feature set.

All parts share identical electrical performance across the specified temperature range and maintain equivalent reliability characteristics under the provided ratings.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF14R7V replace ERJ-S06F14R7V directly?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (14.7 Ω ±1%, 0.125W), operate across -55°C to 155°C, and are packaged in 0805 (2012 Metric). The primary difference is the absence of anti-sulfur coating in the ERJ-6ENF series. For non-sulfur-sensitive applications, direct substitution is valid.

Q: Are all substitute parts suitable for automotive applications?

A: ERJ-6ENF14R7V, CRCW080514R7FKEA, and RMCF0805FT14R7 carry AEC-Q200 automotive qualification. RC0805FR-0714R7L does not list AEC-Q200 rating. For automotive designs requiring AEC-Q200 compliance, use only the three qualified alternatives.

Q: Does physical height variation affect PCB assembly?

A: Height differences range from 0.50mm to 0.70mm maximum seated height. These variations are within standard 0805 package tolerances and do not affect reflow soldering or PCB layout compatibility. Verify specific assembly equipment clearance requirements if height-critical applications exist.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts maintain ROHS3 compliance and MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What is the inventory status for each substitute?

A: ERJ-S06F14R7V: 1112 units; ERJ-6ENF14R7V: 11435 units; CRCW080514R7FKEA: 33554 units; RC0805FR-0714R7L: 9388 units; RMCF0805FT14R7: 1183 units. All parts are listed as new original stock.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message