ERJ-S06F1332V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1332V is a 13.3 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation and is qualified to AEC-Q200 automotive standards with anti-sulfur protection. The part is active in production with 675 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Key Parameters

Parameter	Value
Resistance	13.3 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: resistance value (13.3 kOhms), tolerance (±1%), package format (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99). Parts are grouped into two categories based on power rating: standard 0.125W (1/8W) rated devices and higher-rated 0.5W (1/2W) devices. The 0.125W category includes direct electrical and mechanical equivalents. The 0.5W category represents parts with identical electrical specifications but elevated power handling capability, suitable for applications where thermal margin is required. All substitute parts maintain the same physical dimensions (0.079" L × 0.049" W, 2.00mm × 1.25mm) and two-terminal configuration.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Height Max	RoHS	MSL
ERJ-S06F1332V	Panasonic	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Anti-Sulfur, AEC-Q200	0.028" (0.70mm)	ROHS3	1
ERJ-6ENF1332V	Panasonic	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	AEC-Q200	0.028" (0.70mm)	ROHS3	1
CR0805-FX-1332ELF	Bourns Inc.	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Moisture Resistant	0.024" (0.60mm)	ROHS3	1
CRCW080513K3FKEA	Vishay Dale	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	AEC-Q200	0.020" (0.50mm)	ROHS3	1
CRCW080513K3FKEAHP	Vishay Dale	13.3 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	AEC-Q200, Pulse Withstanding	0.024" (0.60mm)	ROHS3	1
RC0805FR-0713K3L	YAGEO	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Moisture Resistant	0.024" (0.60mm)	ROHS3	1
RCS080513K3FKEA	Vishay Dale	13.3 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	AEC-Q200, Pulse Withstanding	0.020" (0.50mm)	ROHS3	1
RMCF0805FT13K3	Stackpole Electronics Inc	13.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	AEC-Q200	0.026" (0.65mm)	ROHS3	1

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full compliance with ROHS3, REACH Unaffected, and EAR99 classifications. Selection between 0.125W and 0.5W rated devices depends on circuit thermal requirements. For applications requiring AEC-Q200 automotive qualification, select from ERJ-6ENF1332V (Panasonic), CRCW080513K3FKEA (Vishay Dale), CRCW080513K3FKEAHP (Vishay Dale), RCS080513K3FKEA (Vishay Dale), or RMCF0805FT13K3 (Stackpole Electronics). For applications where moisture resistance is specified without automotive qualification, CR0805-FX-1332ELF (Bourns) or RC0805FR-0713K3L (YAGEO) are suitable. Height clearance constraints may influence selection; minimum height is 0.020" (0.50mm) for CRCW080513K3FKEA and RCS080513K3FKEA, while maximum height is 0.028" (0.70mm) for ERJ-6ENF1332V.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F1332V be replaced with a 0.5W rated part such as CRCW080513K3FKEAHP?

A: Yes. The 0.5W rated parts (CRCW080513K3FKEAHP and RCS080513K3FKEA) are electrically and mechanically equivalent to the 0.125W rated ERJ-S06F1332V. The higher power rating provides additional thermal margin and does not affect circuit operation. All other parameters—resistance, tolerance, package, temperature coefficient, and operating range—are identical.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical land pattern dimensions (0.079" L × 0.049" W, 2.00mm × 1.25mm). Height variations range from 0.020" to 0.028" maximum seated height; these differences do not affect PCB assembly compatibility.

Q: Which substitute parts carry AEC-Q200 automotive qualification?

A: AEC-Q200 qualified parts are ERJ-6ENF1332V (Panasonic), CRCW080513K3FKEA (Vishay Dale), CRCW080513K3FKEAHP (Vishay Dale), RCS080513K3FKEA (Vishay Dale), and RMCF0805FT13K3 (Stackpole Electronics). CR0805-FX-1332ELF (Bourns) and RC0805FR-0713K3L (YAGEO) do not carry AEC-Q200 rating.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur protection (ERJ-S06F1332V) is specific to automotive environments where hydrogen sulfide exposure occurs. Moisture-resistant features (CR0805-FX-1332ELF, RC0805FR-0713K3L) provide general environmental protection. These are distinct protective mechanisms; selection depends on application environment specifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message